Great Lakes SR Series Manual de instrucciones de instalación - Página 9
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Bastidores y soportes Great Lakes SR Series. Great Lakes SR Series 12 páginas. 19" eia wall mount swing rack
También para Great Lakes SR Series: Manual de instrucciones de instalación (8 páginas)
Imprimir página
Top/Bottom
Brace (QTY. 2)
Side Brace
Nylon Shoulder Washer
STEP 1
Attach the top and bottom brace to swing rack sides using the 1/4 - 20 x 1/2"
carriage bolts and 1/4 - 20 hex nuts.
STEP 2
Close swing frame and attach using the shoulder bolts.
STEP 3
Mount the assembly to the wall with four lag screws (these are not provided;
The installer is to determine correct hardware for the type of wall). Mounting
holes are designed for 3/8" hardwares, 16" on center.
1/4-20 Hex Nuts w/Serrated
Flanges (QTY. 8)
Socket Head Shoulder Bolts
with 3/8" - 16 Thread (QTY.4)
1/4-20 x 1/2" Lg.
Carriage Bolts (QTY. 8)
Socket Head
Shoulder Bolts
with 3/8"- 16
Thread (QTY. 4)
M6 x 12mm Copper Ground
Studs, (1) On Swing Frame
and (2) on Swing Brace
Swing
Frame
9