Hi-Spec DT40235 Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Herramienta eléctrica Hi-Spec DT40235. Hi-Spec DT40235 7 páginas. 0-15-30w soldering iron set
Imprimir página
WARNING Read all operating instructions carefully and comply with them. Do not
allow familiarity with power tools breed carelessness or contempt.
It is important to understand these instructions and to acquaint yourself with the
tool, its correct usage and all safety requirements. Failure to to do so may result in
electric shock, fire and/or serious personal injury.
Keep this owners manual in a safe and readily-available place.
If you give the tool to any other person, give them these operating instructions as well.
NOTICE
The term "power tool" in the warnings refers to your mains-operated (corded) /power/ tool
or battery-operated (cordless) /power/ tool.
1) Work Area Safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce the risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location or where water and electricity in close
proximity is unavoidable, use an earth-leakage circuit-breaker such as a residual
current device (RCD) or ground fault circuit interrupter (GFCI) protected supply. Use of
an RCD or GFCI reduces the risk of electric shock.
g. Tools marked "Double Insulated"
do not require grounding. They have a special
Owner's Manual
Page 1 of 6