7inova 7R152 Manual de instalación rápida - Página 2

Navegue en línea o descargue pdf Manual de instalación rápida para Enrutador de red 7inova 7R152. 7inova 7R152 2 páginas. Wireless-11n wallmounted wifi router 300m

3.3 Configure Repeater Mode
3.3.1 Follow process 2.3 to 2.4
3.3.2 Select "Repeater" then click "Save"
300Mbps Wireless Router
FW RVE: 7R152_V1.0
3.3.3 Select "Wireless Settings → Wireless Basic Settings", click "Search"
then you will see the new page.
300Mbps Wireless Router
FW RVE: 7R152_V1.0
08
Wireless-N Router
5.2 Wireless Security Configuration
Please click "Wireless Settings → Wireless Security Settings" located
at the web management interface, the following message will be displayed
on your web browser:
Setup the wireless security and encryption to prevent from unauthorized
access and monitoring. Supports 64/128-bit WEP, WPA-Personal, WPA2-
Personal encryption methods.
300Mbps Wireless Router
FW RVE: 7R152_V1.0
Click "Apply" button, the WiFi Router will become effective.
5.3 Change Management password
Default password of Wireless Router is "admin", and it's displayed on the
login prompt when accessed from web browser. There's a security risk
you don't change the default password, since everyone can see it. This is
very important when you have wireless function enabled.
To change password, please follow the following instruction:
Please click "System Tools → Password" menu on the web management
interface, the following message will be displayed on your web browser:
12
Wireless-N Router
3.3.4 Select your Wireless SSID to continue.
3.3.5 When you see the site below, please do not change any setting but
only insert the key of your network.
Click on "Apply" wait for a few, then accord to "4 Reconnect to Router" to
reconnect the router
300Mbps Wireless Router
FW RVE: 7R152_V1.0
09
Wireless-N Router
300Mbps Wireless Router
FW RVE: 7R152_V1.0
If you want to keep original password unchanged, click "Cancel".
Click "Save" button, the WiFi Router will become effective
5.4 Firmware Upgrade
The system software used by this router is called as "firmware", just like
any applications on your computer, when you replace the old application
with a new one, your computer will be equipped with new function. You
can also use this firmware upgrade function to add new functions to your
router, even fix the bugs of this router.
Please click "System Tools → Firmware Upgrade" located at the located
at the web management interface, then the following message will be
displayed on your web browser.
13
Wireless-N Router
4 Reconnect to Router
4.1 Click "Start→Control Panel→Network and Internet→Network and Sharing
Center→Change adapter settings→Wi-Fi(right click)→Properties"
4.2 Double click "Internet Protocol Version 4(TCP/IPv4)"
4.3 Select "Obtain an IP address automatically" and "Obtain DSN
server address automatically". Click "OK". Back to the last
interface and click "OK"
4.4 Select the wireless network name
configured in "3 Configuration Mode" ,
click "Connect" button.
4.5 If you encrypted wireless network in
"3 Configuration Mode", the following
message will be displayed on web
browser, fill in password, click "OK"
10
Wireless-N Router
300Mbps Wireless Router
FW RVE: 7R152_V1.0
Click "Browse" button first, you'll be prompted to provide the filename of
firmware upgrade file. Please download the latest firmware file from our
website, and use it to upgrade your router.
After a firmware upgrade file is selected, click "Upgrade" button, and the
router will start firmware upgrade procedure automatically.
The procedure may take several minutes, please be patient.
Note: Never interrupt the upgrade procedure by closing the web browser or
physically disconnect your computer from router. If the firmware you upgrade is
corrupt, the firmware upgrade will fail, and you may have to return this router to
the dealer of purchase to ask for help. (Warranty voids if you interrupted the
upgrade procedure).
5.5 Settings Backup and Restore, Factory Default
You can backup all Setting of this router to a file, so you can make several
copied of router configuration for security reason.
To backup or restore router setting, please follow the following instruction:
Please click "System Tools → Backup and Restore" and "System
Tools → Factory Default" located at the web management interface,
then the following message will be displayed on your web browser:
14
Wireless-N Router
5 Configuring via Web Browser
5.1 Wireless Base Configuration
Please click "Wireless Settings → Wireless Basic Settings" located at
the web management interface, the following message will be displayed
on your web browser:
You could configure the minimum number of Wireless settings for
communication, such as SSID and Channel. The Access Point can be set
simpty with only the minimum setting items.
300Mbps Wireless Router
FW RVE: 7R152_V1.0
Wireless Status
Wireless On/Off
Main Service Set Identifier.
SSID
It's the "name" of your wireless network.
Wireless Mode
Supports 11b/g/n mixed modes
Channel
6(default)
SSID Broadcast
Wireless Signal On/Off
11
Wireless-N Router
300Mbps Wireless Router
300Mbps Wireless Router
FW RVE: 7R152_V1.0
FW RVE: 7R152_V1.0
Press "Back up" button, you can please save it as another
Back up
filename for different versions, and keep it in a safe place.
Press "Browse" to pick a previously-saved configuration file
Browse
from your computer, and the click "Save". After the replaced
by the file you just uploaded.
Restore All Settings
Click "Restore All Settings" button to remove all settings
Click "Save" and "Restore All Settings" button. The router will restart.
Appendix: Troubleshooting
What can I do if I forgot my password?
1) Restore the 7R152's configuration to its factory default settings. (With
7R152 powered on, use a pin to press and hold the Reset button for
about 3-5 seconds before releasing it).
2)To log in the Web Management page, use the default user name and
password: admin, admin. To connect to the Wireless Network, use the
default password on the label.
3)Try to configure 7R152 once again by following the instructions in the
previous steps of the QIG.
15
Wireless-N Router