7inova 7R152 Посібник зі швидкого встановлення - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Мережевий маршрутизатор 7inova 7R152. 7inova 7R152 2 сторінки. Wireless-11n wallmounted wifi router 300m

Друкувати сторінку

3.3 Configure Repeater Mode

3.3.1 Follow process 2.3 to 2.4

3.3.2 Select "Repeater" then click "Save"

300Mbps Wireless Router

FW RVE: 7R152_V1.0

3.3.3 Select "Wireless Settings → Wireless Basic Settings", click "Search"

then you will see the new page.

300Mbps Wireless Router

FW RVE: 7R152_V1.0

Wireless-N Router

5.2 Wireless Security Configuration

Please click "Wireless Settings → Wireless Security Settings" located

at the web management interface, the following message will be displayed

on your web browser:

Setup the wireless security and encryption to prevent from unauthorized

access and monitoring. Supports 64/128-bit WEP, WPA-Personal, WPA2-

Personal encryption methods.

300Mbps Wireless Router

FW RVE: 7R152_V1.0

Click "Apply" button, the WiFi Router will become effective.

5.3 Change Management password

Default password of Wireless Router is "admin", and it's displayed on the

you don't change the default password, since everyone can see it. This is

very important when you have wireless function enabled.

To change password, please follow the following instruction:

Please click "System Tools → Password" menu on the web management

interface, the following message will be displayed on your web browser:

Wireless-N Router

3.3.4 Select your Wireless SSID to continue.

3.3.5 When you see the site below, please do not change any setting but

only insert the key of your network.

Click on "Apply" wait for a few, then accord to "4 Reconnect to Router" to

reconnect the router

300Mbps Wireless Router

FW RVE: 7R152_V1.0

Wireless-N Router

300Mbps Wireless Router

FW RVE: 7R152_V1.0

If you want to keep original password unchanged, click "Cancel".

Click "Save" button, the WiFi Router will become effective

5.4 Firmware Upgrade

The system software used by this router is called as "firmware", just like

any applications on your computer, when you replace the old application

with a new one, your computer will be equipped with new function. You

can also use this firmware upgrade function to add new functions to your

router, even fix the bugs of this router.

Please click "System Tools → Firmware Upgrade" located at the located

at the web management interface, then the following message will be

displayed on your web browser.

Wireless-N Router

4 Reconnect to Router

4.1 Click "Start→Control Panel→Network and Internet→Network and Sharing

Center→Change adapter settings→Wi-Fi(right click)→Properties"

4.2 Double click "Internet Protocol Version 4(TCP/IPv4)"

4.3 Select "Obtain an IP address automatically" and "Obtain DSN

server address automatically". Click "OK". Back to the last

interface and click "OK"

4.4 Select the wireless network name

configured in "3 Configuration Mode" ,

click "Connect" button.

4.5 If you encrypted wireless network in

"3 Configuration Mode", the following

message will be displayed on web

browser, fill in password, click "OK"

Wireless-N Router

300Mbps Wireless Router

FW RVE: 7R152_V1.0

Click "Browse" button first, you'll be prompted to provide the filename of

firmware upgrade file. Please download the latest firmware file from our

website, and use it to upgrade your router.

After a firmware upgrade file is selected, click "Upgrade" button, and the

router will start firmware upgrade procedure automatically.

The procedure may take several minutes, please be patient.

Note: Never interrupt the upgrade procedure by closing the web browser or

physically disconnect your computer from router. If the firmware you upgrade is

corrupt, the firmware upgrade will fail, and you may have to return this router to

the dealer of purchase to ask for help. (Warranty voids if you interrupted the

upgrade procedure).

5.5 Settings Backup and Restore, Factory Default

You can backup all Setting of this router to a file, so you can make several

copied of router configuration for security reason.

To backup or restore router setting, please follow the following instruction:

Please click "System Tools → Backup and Restore" and "System

Tools → Factory Default" located at the web management interface,

then the following message will be displayed on your web browser:

Wireless-N Router

5 Configuring via Web Browser

5.1 Wireless Base Configuration

Please click "Wireless Settings → Wireless Basic Settings" located at

the web management interface, the following message will be displayed

on your web browser:

You could configure the minimum number of Wireless settings for

communication, such as SSID and Channel. The Access Point can be set

simpty with only the minimum setting items.

300Mbps Wireless Router

FW RVE: 7R152_V1.0

Wireless Status

Wireless On/Off

Main Service Set Identifier.

SSID

It's the "name" of your wireless network.

Wireless Mode

Supports 11b/g/n mixed modes

Channel

6(default)

SSID Broadcast

Wireless Signal On/Off

Wireless-N Router

300Mbps Wireless Router

FW RVE: 7R152_V1.0

Press "Back up" button, you can please save it as another

Back up

filename for different versions, and keep it in a safe place.

Press "Browse" to pick a previously-saved configuration file

Browse

from your computer, and the click "Save". After the replaced

by the file you just uploaded.

Restore All Settings

Click "Restore All Settings" button to remove all settings

Click "Save" and "Restore All Settings" button. The router will restart.

Appendix: Troubleshooting

What can I do if I forgot my password?

1) Restore the 7R152's configuration to its factory default settings. (With

7R152 powered on, use a pin to press and hold the Reset button for

about 3-5 seconds before releasing it).

2)To log in the Web Management page, use the default user name and

password: admin, admin. To connect to the Wireless Network, use the

default password on the label.

3)Try to configure 7R152 once again by following the instructions in the

previous steps of the QIG.

Wireless-N Router