GREAT PLAINS BD7600 Manual de inicio rápido - Página 18
Navegue en línea o descargue pdf Manual de inicio rápido para Sembradoras GREAT PLAINS BD7600. GREAT PLAINS BD7600 20 páginas. Box drill
También para GREAT PLAINS BD7600: Manual de ajuste de campo (12 páginas)
Imprimir página
Target Rate
Tap the Target Rate field to input the desired rate of
material application during field operation.
Target Rate Increment
Tap the Target Rate Increment field to input the
desired incremental increases and decreases for
adjustments to target rate during field operations. 10%
is the factory preset value.
Calibration Factor
Tap the Calibration Factor field to input the calibration
factor from the BD7600 Material Rate manual.
Please Note: It is possible to enter these
i
values within other menus, however Great
Plains recommends using these instructions to
ensure all required system inputs are entered.
Field Speed
Catching Rows
Field Speed
Tap the Field Speed field to input the target field speed
during field operations. Great Plains recommends a
field speed between 3-6 mph.
Catching Rows
Tap the Catching Rows field to input the number of
rows for collection. Great Plains recommends the
collection of 4-5 rows.
Actual Weight
Great Plains | 195-835QS | 03/25/2022
BD7600 Quick Start Guide
Actual Weight
Tap the actual weight field to input the actual weight of
the collection sample during the calibration operation.
Troubleshooting
An unsuccessful meter calibration operation most
often times occurs because:
The calibration operation was canceled when
key was tapped. Results will not be saved.
Please Note: Menu shown is not the only
i
opportunity to cancel the calibration operation.
On any of the calibration menus, the calibration
operation can be canceled by tapping
key.
The calibration results were not accepted on the final
step. Accept calibration results by tapping
keys.
soft
soft
soft
17