Automate ValveLink 8 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Enrutador de red Automate ValveLink 8. Automate ValveLink 8 16 páginas.

ValveLink8 - Part #01-18

For indoor use only from 5° to 40° C.

Do not get wet or subject to visible condensation.

Clean with a mild soap solution with a damp cloth only.

This equipment must be earth grounded. Use any of the

screws on the bottom of the case. See page 12.

Do not unplug valves while on!

Do not attempt to repeatedly cycle valves on and off in under

10 milliseconds.

If this equipment is used in a manner not specifi ed by the

manufacturer, the protection provided by the equipment may

be impaired.

Supply voltage:

ValveLink8 controller = 12 V AC up to 2.4 Amps @ 50-60 Hz

External power supplies:

USA & Japan = 110 V AC up to 0.26 Amps @ 60 Hz

European = 220 V AC up to 0.17 Amps @ 50 Hz

Internal battery type:

Please replace fuse with standard 2.5 Amp (M) medium-time

/ blow fuse.

3V Lithium coin battery

type BR2325 coin or CR2032

23mm x 165mAh