Automated Logic LGC Instrucciones técnicas - Página 2

Navegue en línea o descargue pdf Instrucciones técnicas para Controlador Automated Logic LGC. Automated Logic LGC 7 páginas.

Imprimir página

1. Using the Lgc

Using the LGC

The LGC is part of the LANgate family and

provides communication between a

workstation and a control module network

(CMnet) consisting of fewer than 100

modules.

The LGC communicates with the CMnet using

an EIA-485 connection. The CMnet is a peer-

to-peer network that allows all control

modules to communicate with equal

authority using a token-passing protocol.

EIA-232

Console Port 1

EIA-232

Console Port 2

Auxiliary

Device Port

CMnet Baud

Rate Jumper

Access Port

LEDs

NOTE This equipment has been tested and

found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated

in a commercial environment. This

equipment generates, uses, and can radiate

radio frequency energy and, if not installed

Revised 6/16/00 • LGC

A workstation can communicate with the LGC

directly or through a modem. The LGC

provides two EIA-232 Console Ports and an

Access Port that can be connected to a

workstation, portable computer, or a modem.

The LGC must use v6.00g or later of the LGM

module driver. For more information, see the

LGM Module Driver document on the

Automated Logic website at

www.automatedlogic.com.

6 1/4"

Figure 1. Module dimensions and layout

and used in accordance with the instruction

manual, may cause harmful interference to

radio communications. Operation of this

equipment in a residential area is likely to

cause harmful interference in which case the

user will be required to correct the

interference at his own expense.

Power Switch

Manual Format

Button

Addressing

DIP Switch

CMnet

Connection

7 1/8"

1 5/8"