ADEMCO VISTA-15P Manual de programación - Página 7

Navegue en línea o descargue pdf Manual de programación para Sistema de seguridad ADEMCO VISTA-15P. ADEMCO VISTA-15P 17 páginas. Programming auto arming and disarming schedules
También para ADEMCO VISTA-15P: Manual de instalación rápida (2 páginas), Manual de programación (17 páginas), Manual del usuario (20 páginas), Manual de instalación rápida (2 páginas), Manual de instalación rápida (2 páginas), Manual de programación (2 páginas), Manual rápido (2 páginas)

Imprimir página

SYSTEM OPTIONS *180-*181

✱ 181 50/60 HERTZ AC OPERATION

✱ 182 CONFIGURABLE ZONE TYPE 90

✱ 183 ZONE TYPE 90 REPORT CODES

IMPORTANT: Use existing Contact ID®

codes, if appropriate, or define unique codes

in CID code range 750-789. See important

note in installation instructions.

✱ 184 CONFIGURABLE ZONE TYPE 91

✱ 185 ZONE TYPE 91 REPORT CODES

IMPORTANT: Use existing Contact ID®

codes, if appropriate, or define unique codes

in CID code range 750-789. See important

note in installation instructions.

KEYPAD OPTIONS *190-*196 (NOTE : Options for keypad address 16 are set by the factory and cannot be changed.)

NOTE: Each keypad must be assigned a unique address. Keypads programmed with the same address will give

unpredictable results.

∗190 KEYPAD 2 ADDRESS 17

∗191 KEYPAD 3 ADDRESS 18

∗192 KEYPAD 4 ADDRESS 19

∗193 KEYPAD 5 ADDRESS 20

∗194 KEYPAD 6 ADDRESS 21

∗195 KEYPAD 7 ADDRESS 22

∗196

KEYPAD 8 ADDRESS 23

∗197 EXIT TIME DISPLAY INTERVAL

∗198 DISPLAY PARTITION NUMBER

(for Alpha Display Keypads)

∗199 ECP FAIL DISPLAY

[0]

Make the appropriate entry for each digit, 1-10, based on the charts provided on the

next page. Each digit's entry is the sum of the values of its selected options

(0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=14, #+15=15).

UL: Do not configure zones as a fire alarm or UL burglar alarm zone.

90 ALARM ID: XXX

TROUBLE ID: XXX

Make the appropriate entry for each digit, 1-10, based on the charts provided on the

next page. Each digit's entry is the sum of the values of its selected options

(0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=14, #+15=15).

UL: Do not configure zones as a fire alarm or UL burglar alarm zone.

91 ALARM ID: XXX

TROUBLE ID: XXX

[0] [0]

Partition/

Sound

Enable

VISTA-20P: enter partition

VISTA-15P: 1 = enable

0 = disable

[0] [0]

†

Part./Enable

Sound

[0] [0]

†

Part. /Enable

Sound

[0] [0]

†

Part. /Enable

Sound

[0] [0]

†

Part. /Enable

Sound

[0] [0]

†

Part. /Enable

Sound

[0] [0]

†

Part. /Enable

Sound

[0]

– 7 –

0 = 60 Hz; 1 = 50 Hz

Enter the desired 3-digit Contact ID® report codes for

alarms and troubles occurring on zones assigned to

this zone type. Enter the codes sequentially (all 6

digits). When entering digits, [#] moves cursor back, [∗]

moves forward. Press [∗] when done to continue.

Enter the desired 3-digit Contact ID® report codes for

alarms and troubles occurring on zones assigned to

this zone type. Enter the codes sequentially (all 6

digits). When entering digits, [#] moves cursor back, [∗]

moves forward. Press [∗] when done to continue.

Partition: 0 = keypad disabled; 1-3 = part. no. (3 = com)

Sound:

0 = no suppression

1 = suppress arm/disarm and E/E beeps

2 = Suppress chime beeps only

3 = suppress arm/disarm, E/E, and chime

beeps

See field ∗190 for entries.

† VISTA-20P: enter partition