- ページ 7

セキュリティシステム ADEMCO VISTA-15PのPDF プログラミング・マニュアルをオンラインで閲覧またはダウンロードできます。ADEMCO VISTA-15P 17 ページ。 Programming auto arming and disarming schedules
ADEMCO VISTA-15P にも：クイック・インストール・マニュアル (2 ページ), プログラミング・マニュアル (17 ページ), ユーザーマニュアル (20 ページ), クイック・インストール・マニュアル (2 ページ), クイック・インストール・マニュアル (2 ページ), プログラミング・マニュアル (2 ページ), クイックマニュアル (2 ページ)

ページを印刷する

SYSTEM OPTIONS *180-*181

✱ 181 50/60 HERTZ AC OPERATION

✱ 182 CONFIGURABLE ZONE TYPE 90

✱ 183 ZONE TYPE 90 REPORT CODES

IMPORTANT: Use existing Contact ID®

codes, if appropriate, or define unique codes

in CID code range 750-789. See important

note in installation instructions.

✱ 184 CONFIGURABLE ZONE TYPE 91

✱ 185 ZONE TYPE 91 REPORT CODES

IMPORTANT: Use existing Contact ID®

codes, if appropriate, or define unique codes

in CID code range 750-789. See important

note in installation instructions.

KEYPAD OPTIONS *190-*196 (NOTE : Options for keypad address 16 are set by the factory and cannot be changed.)

NOTE: Each keypad must be assigned a unique address. Keypads programmed with the same address will give

unpredictable results.

∗190 KEYPAD 2 ADDRESS 17

∗191 KEYPAD 3 ADDRESS 18

∗192 KEYPAD 4 ADDRESS 19

∗193 KEYPAD 5 ADDRESS 20

∗194 KEYPAD 6 ADDRESS 21

∗195 KEYPAD 7 ADDRESS 22

∗196

KEYPAD 8 ADDRESS 23

∗197 EXIT TIME DISPLAY INTERVAL

∗198 DISPLAY PARTITION NUMBER

(for Alpha Display Keypads)

∗199 ECP FAIL DISPLAY

[0]

Make the appropriate entry for each digit, 1-10, based on the charts provided on the

next page. Each digit's entry is the sum of the values of its selected options

(0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=14, #+15=15).

UL: Do not configure zones as a fire alarm or UL burglar alarm zone.

90 ALARM ID: XXX

TROUBLE ID: XXX

Make the appropriate entry for each digit, 1-10, based on the charts provided on the

next page. Each digit's entry is the sum of the values of its selected options

(0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=14, #+15=15).

UL: Do not configure zones as a fire alarm or UL burglar alarm zone.

91 ALARM ID: XXX

TROUBLE ID: XXX

[0] [0]

Partition/

Sound

Enable

VISTA-20P: enter partition

VISTA-15P: 1 = enable

0 = disable

[0] [0]

†

Part./Enable

Sound

[0] [0]

†

Part. /Enable

Sound

[0] [0]

†

Part. /Enable

Sound

[0] [0]

†

Part. /Enable

Sound

[0] [0]

†

Part. /Enable

Sound

[0] [0]

†

Part. /Enable

Sound

[0]

– 7 –

0 = 60 Hz; 1 = 50 Hz

Enter the desired 3-digit Contact ID® report codes for

alarms and troubles occurring on zones assigned to

this zone type. Enter the codes sequentially (all 6

digits). When entering digits, [#] moves cursor back, [∗]

moves forward. Press [∗] when done to continue.

Enter the desired 3-digit Contact ID® report codes for

alarms and troubles occurring on zones assigned to

this zone type. Enter the codes sequentially (all 6

digits). When entering digits, [#] moves cursor back, [∗]

moves forward. Press [∗] when done to continue.

Partition: 0 = keypad disabled; 1-3 = part. no. (3 = com)

Sound:

0 = no suppression

1 = suppress arm/disarm and E/E beeps

2 = Suppress chime beeps only

3 = suppress arm/disarm, E/E, and chime

beeps

See field ∗190 for entries.

† VISTA-20P: enter partition