HiBoost F10G-CP Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Amplificador de señal HiBoost F10G-CP. HiBoost F10G-CP 20 páginas. Cellular 3g signal booster
Imprimir páginaOmni Ceiling directional antenna
Place in the center of the area where the signal needs to be amplified.
Panel directional antenna
Place in the outer perimeter of the area the signal needs to be amplified.
Whip Omni directional antenna
Mount directly to the connector marked "indoor" on the cellular booster.
3.7 Install your cellular booster
Install the cellular booster in a location that is properly ventilated and
not exposed to excessive heat, moisture and/or direct sunlight. The
optimal area would be on a wall located near a power outlet.
It should be mounted in an easily accessible area so it's easy to perform
general maintenance with the coaxial cable connections, dip switch
settings and power adaptor.
Make sure all cables and antennas are securely connected before
commissioning the system.
3.8 Power up your cellular booster
Once all the Following precautions have been taken, power on the
cellular booster.
1. Verify that you have left at least 20 feet of vertical separation space between the