- ページ 10

シグナルブースター HiBoost F10G-CPのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HiBoost F10G-CP 20 ページ。 Cellular 3g signal booster

Omni Ceiling directional antenna

Place in the center of the area where the signal needs to be amplified.

Panel directional antenna

Place in the outer perimeter of the area the signal needs to be amplified.

Whip Omni directional antenna

Mount directly to the connector marked "indoor" on the cellular booster.

3.7 Install your cellular booster

Install the cellular booster in a location that is properly ventilated and

not exposed to excessive heat, moisture and/or direct sunlight. The

optimal area would be on a wall located near a power outlet.

It should be mounted in an easily accessible area so it's easy to perform

general maintenance with the coaxial cable connections, dip switch

settings and power adaptor.

Make sure all cables and antennas are securely connected before

commissioning the system.

3.8 Power up your cellular booster

Once all the Following precautions have been taken, power on the

cellular booster.

1. Verify that you have left at least 20 feet of vertical separation space between the