Automatic Systems TR450 Manual de instalación - Página 10

Navegue en línea o descargue pdf Manual de instalación para Torniquetes Automatic Systems TR450. Automatic Systems TR450 13 páginas. Tripod turnstile

3.4.

Mounting the tripod arms

•

Remove the grease from the thread (5:1) of the arms (5:2) with trichlorethylene (care must be

taken when using any substance or chemical that can be harmful, refer to the manufacturer's

information and/or a Health & Safety "Risk Assessment") and apply some Loctite

an equivalent industrial bonding adhesive on the thread.

•

Screw the arms into the central hub, turn them clockwise and tighten them firmly with the help of

a strap tube-wrench.

•

For each of the arms, fix the conic-end screw (5:3) and tighten it firmly. The screws are supplied

as accessories in a separate bag.

•

Apply a drop of Loctite

to lock the conic-end screw (5:3).

 Automatic Systems TR450-GB

ST. STEEL ARM -/0208/172

LENGTH 480MM

Fig. 5



243 (blue) on the thread of the flat-end screw (5:4) and tighten this firmly

YD-XX

MQ-1302

31/08/97

Automatic Systems

5:3

LOCTITE

5:4

5:2

Installation TR450

2-1105GB

243

5:1



243 (blue) or

p. 10/12

Rev.: A