Automatic Systems TR450 Instrukcja instalacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Bramki obrotowe Automatic Systems TR450. Automatic Systems TR450 13 stron. Tripod turnstile
Drukuj stronę3.4.
Mounting the tripod arms
•
Remove the grease from the thread (5:1) of the arms (5:2) with trichlorethylene (care must be
taken when using any substance or chemical that can be harmful, refer to the manufacturer's
information and/or a Health & Safety "Risk Assessment") and apply some Loctite
an equivalent industrial bonding adhesive on the thread.
•
Screw the arms into the central hub, turn them clockwise and tighten them firmly with the help of
a strap tube-wrench.
•
For each of the arms, fix the conic-end screw (5:3) and tighten it firmly. The screws are supplied
as accessories in a separate bag.
•
Apply a drop of Loctite
to lock the conic-end screw (5:3).
Automatic Systems TR450-GB
ST. STEEL ARM -/0208/172
LENGTH 480MM
Fig. 5
243 (blue) on the thread of the flat-end screw (5:4) and tighten this firmly
YD-XX
MQ-1302
31/08/97
Automatic Systems
5:3
LOCTITE
5:4
5:2
Installation TR450
2-1105GB
R
243
5:1
243 (blue) or
p. 10/12
Rev.: A