Automatic Technology GDO-6 EasyRoller Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Abrepuertas de garaje Automatic Technology GDO-6 EasyRoller. Automatic Technology GDO-6 EasyRoller 20 páginas. Rolling door openers
También para Automatic Technology GDO-6 EasyRoller: Instrucciones de instalación (2 páginas), Manual de instrucciones rápidas (6 páginas)
Imprimir página
4
GDO-6 EasyRoller
2. Features
Warranty
Two (2) year/5,000 cycles full parts and labour
warranty on motor, electronics and mechanical
components of the opener when installed by an
Automatic Technology Dealer.
TrioCode
128 Technology
TM
Only
transmitters
Technology can operate with the latest Openers,
reducing the chance of interference from other radio
frequency sources. TrioCode
have the ability to code into earlier model openers.
Code Hopping Technology
Every time a transmitter is used a new security code
is generated from over 100 billion possible code
combinations. This greatly enhances the security of
the system and makes "code grabbing" a thing of
the past!
Multi-Channel Transmitter
Multi-channel transmitters allow you to operate
other devices such as an adjoining garage door or
automated gate from the same handy unit.
Safety Reversing System
The automatic safety reverse system significantly
reduces the risk of
trapped by a closing door. The safety reverse force
can be adjusted for environmental conditions such
as windy areas.
Memory Retention
In case of a power failure the opener does not lose
the transmitter codes or limit settings.
Manual Release
The manual release handle allows the door to be
operated by hand in the event of a power failure.
Easy Access Transmitter
Inside the manual release handle is a transmitter
designed to be in easy reach so that the garage
door can be operated without having to stretch to
reach the operate button on the control panel.
Self Locking
There is no need to manually lock your garage
door, as the opener 'positively' locks the door when
closed.
®
Home Owner's Manual
with
the
TrioCode
128 transmitters
TM
death or serious injury if
Service Indicator
The opener has a built in service counter. From
factory this is loaded with 3000 cycles. When this
counter expires, the service yellow LED will light
up and at the start of each door movement the
beeper will sound three times. After opening
or closing the door the courtesy light will flash
TM
128
and beeper sound five times. Contact your
dealer/installer for service. (Refer to 10.5 for
information).
Service Fault Indicator
Flashing LEDs on the control panel easily identify
operational problems or service requirements.
Dynamic Door Profiling
Changing door characteristics are automatically
compensated for and "learnt" with each
operation of the door.
Vacation Mode
A transmitter can be programmed to disable
the garage door opener radio receiver. This is
ideal if the door is to be left idle for prolonged
periods. (Refer to 8.2 for information)
Pet (Pedestrian) Mode
A transmitter can be programmed to open
the door partially to allow pets access to the
garage. The default PET Mode height can be
adjusted to a desired position. (Refer to 7.4 for
information). To code a transmitter button to
operate PET mode refer to 8.3 for information.
LED Courtesy Light
Using the latest Light Emitting Diode (LED)
technology, the opener features two LEDS
These LEDS produce a brilliant white light that
illuminates the garage upon activation.
The LED courtesy light automatically switches
on for approximately four (4) minutes (time
programmable) when operating the door. This
can also be programmed to turn on and off
from a transmitter. (Refer to 8.4 for information)