Activeforever Conversion II 9003 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Gimnasios Activeforever Conversion II 9003. Activeforever Conversion II 9003 20 páginas. Conversion ii 9003 trainers

Imprimir página

ASSEMBLY INSTRUCTIONS

Release

NOTE: Be careful not to damage the PULSE SENSOR WIRES(73, 74) while doing assembly Step 8 to

Step 10.

STEP 8

Attach the HANDRAIL(70) onto the SEAT CARRIAGE(64) with BUTTON HEAD BOLTS(M8x1.25x12mm)

(114).

STEP 9

Attach the SEAT(68) onto the SEAT CARRIAGE(64) with HEX BOLTS(M6x1x15mm)(95). Attach the

BACK CUSHION(69) onto the SEAT CARRIAGE(64) with HEX BOLTS(M6x1x30mm)(96).

STEP 10

Turn the knob of the SPRING PIN(67) counterclockwise and lock the knob in the release position, refer to

the inset drawing. Slide the SEAT CARRIAGE ASSEMBLY(64) onto the RAIL(52).

Press the RAIL CAP(55) into the back end of the RAIL(52). Insert the STOPPER BOLT(54) through the

RAIL(52) and RAIL CAP(55) to bolt them together with the STOPPER(53). Please verify that the other

STOPPER BOLT(54) at the front end of RAIL(52) was assembled at the factory.