Activeforever Conversion II 9003 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Activeforever Conversion II 9003에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Activeforever Conversion II 9003 20 페이지. Conversion ii 9003 trainers

페이지 인쇄

ASSEMBLY INSTRUCTIONS

Release

NOTE: Be careful not to damage the PULSE SENSOR WIRES(73, 74) while doing assembly Step 8 to

Step 10.

STEP 8

Attach the HANDRAIL(70) onto the SEAT CARRIAGE(64) with BUTTON HEAD BOLTS(M8x1.25x12mm)

(114).

STEP 9

Attach the SEAT(68) onto the SEAT CARRIAGE(64) with HEX BOLTS(M6x1x15mm)(95). Attach the

BACK CUSHION(69) onto the SEAT CARRIAGE(64) with HEX BOLTS(M6x1x30mm)(96).

STEP 10

Turn the knob of the SPRING PIN(67) counterclockwise and lock the knob in the release position, refer to

the inset drawing. Slide the SEAT CARRIAGE ASSEMBLY(64) onto the RAIL(52).

Press the RAIL CAP(55) into the back end of the RAIL(52). Insert the STOPPER BOLT(54) through the

RAIL(52) and RAIL CAP(55) to bolt them together with the STOPPER(53). Please verify that the other

STOPPER BOLT(54) at the front end of RAIL(52) was assembled at the factory.