Gaia Baby Hera peg rail Manual de instrucciones de montaje - Página 4
Navegue en línea o descargue pdf Manual de instrucciones de montaje para Bebé & Muebles para niños pequeños Gaia Baby Hera peg rail. Gaia Baby Hera peg rail 8 páginas.
Imprimir páginaFitting the peg rail
WARNING: Before attempting to fit the peg rail to the wall, if you are in
any way unsure about how or where to fit the peg rail you should employ
a qualified person to install your peg rail.
IMPORTANT: The fittings supplied with your peg rail may not be suitable
for all types of wall. Please consult a professional for advice before
drilling any holes if you are in any doubt.
IMPORTANT: Mark the position on the wall that you want the peg rail to
be fitted to and check that they align with the holes in the back of the
peg rail before drilling any holes.
1. The distance between the outer holes must be 645 mm. Ensure the
holes are level using a spirit level.
2. Drill 2 parallel holes (Ø 5 mm each according to wall type) in the wall
Firmly insert the wall plugs into the holes if required (not required for
wooden structures). Tighten the screws provided into the wall using
a screwdriver.
3. Leave approximately 7mm of the screw head protruding from the
wall so that when the shelf is fitted it fits flush against the wall.
Note: You may need to adjust the length of the screw protruding
from the wall to get the peg rail to fit flush against the wall.
4
CHINA Hera Peg rail.indd 4
1.
645 mm
1 to 2 mm
2.
3.
7 mm
5 mm
21/01/2022 09:33