Gaia Baby Hera peg rail 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} Gaia Baby Hera peg rail에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaia Baby Hera peg rail 8 페이지.

Fitting the peg rail

WARNING: Before attempting to fit the peg rail to the wall, if you are in

any way unsure about how or where to fit the peg rail you should employ

a qualified person to install your peg rail.

IMPORTANT: The fittings supplied with your peg rail may not be suitable

for all types of wall. Please consult a professional for advice before

drilling any holes if you are in any doubt.

IMPORTANT: Mark the position on the wall that you want the peg rail to

be fitted to and check that they align with the holes in the back of the

peg rail before drilling any holes.

1. The distance between the outer holes must be 645 mm. Ensure the

holes are level using a spirit level.

2. Drill 2 parallel holes (Ø 5 mm each according to wall type) in the wall

Firmly insert the wall plugs into the holes if required (not required for

wooden structures). Tighten the screws provided into the wall using

a screwdriver.

3. Leave approximately 7mm of the screw head protruding from the

wall so that when the shelf is fitted it fits flush against the wall.

Note: You may need to adjust the length of the screw protruding

from the wall to get the peg rail to fit flush against the wall.

CHINA Hera Peg rail.indd 4

645 mm

1 to 2 mm

7 mm

5 mm

21/01/2022 09:33