Celestron 22151 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Telescopio Celestron 22151. Celestron 22151 9 páginas.

THE SLOW MOTION KNOBS

To attach the slow motion knobs to your mount:

1. Locate the supplied hex key hidden inside the slot in the

Locate the supplied hex key hidden inside the slot in the

front of your mount.

2. Place the slow motion control knob over the D-shaped

Place the slow motion control knob over the D-shaped

gear shaft and push inward to make sure it is fully seated.

3. Use the hex key to tighten the setscrews onto the gear

Use the hex key to tighten the setscrews onto the gear

shaft.

4. Return the hex key to its storage position in the front of

Return the hex key to its storage position in the front of

the mount.

THE TELESCOPE TUBE

To attach the telescope tube to your tripod and mount:

1. Locate the dovetail bar mounted on the side of the

telescope tube.

2. Holding the telescope tube next to the mount, slide the

dovetail bar into the clamp at the top of the mount.

3. Tighten the hand knob on the bottom of the clamp to

secure the telescope in place.

NOTE:

The 102 mm refractor is shown, but the 114 mm and 130 mm Newtonian telescopes

attach to the mount in the same way.

The star diagonal attaches to the back of a refracting

telescope and contains a small prism that reﬂ ects light

at a 90° angle, providing a more comfortable viewing

position.

Because a star diagonal gives you a 100%

correctly oriented image, you can easily use the telescope

for daytime terrestrial observing.

To insert the diagonal:

1. Remove the caps from both sides of the diagonal.

2. Loosen the setscrews on the back of the focuser and

pull out the small dust cap.

3. Insert the smaller tube on the diagonal into the back of

the focuser and secure it by tightening the setscrews.

You can rotate the diagonal to any position by loosening

the setscrews.

| ENGLISH

(FOR 102 MM REFRACTOR ONLY)