Dynalink A 3605 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Extensor Dynalink A 3605. Dynalink A 3605 17 páginas. Hdmi 4k wireless sender system

A 3605 HDMI 4K Wireless Sender System

Connecting Infra-Red Return

The 4K wireless HDMI extender has a Built in "infrared return" that en-

ables continued operation of the connected HDMI sources from another

room.For example,operate your HDMI source downstairs from your

bedroom (location of second TV).

The IR cable receives the commands sent by the IR receiver and forward

it to your connected HDMI sources.

Connect the IR cable (2 - on figure above) to the HD transmitter's con-

nector marked "IR''.

Make sure that the LED of the IR cable is attached exactly over the HDMI

source's infrared sensor (with some equipment,this needs to be done

very precisely). The exact position can be found easily by shining a torch

on the front panel, searching for the IR sensor window.

Please experiment with correct placement before final attachment of

the IR LED .

The adhesive strip may cause discoloration on certain surfaces, or leave

adhesive residues after removal.

Testing the IR return function

Once you have connected the IR cable according to the above descrip-

tion, it is recommended to test the function first.

Aim your remote control towards the IR on the front side of receiver and

send a command. The command will be transferred from the receiver to

the transmitter at the second location. The HDMI source should execute

the command sent by your remote control.