Dynalink A 3605 Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Удлинитель Dynalink A 3605. Dynalink A 3605 17 страниц. Hdmi 4k wireless sender system
Печатать страницуA 3605 HDMI 4K Wireless Sender System
Connecting Infra-Red Return
The 4K wireless HDMI extender has a Built in "infrared return" that en-
ables continued operation of the connected HDMI sources from another
room.For example,operate your HDMI source downstairs from your
bedroom (location of second TV).
The IR cable receives the commands sent by the IR receiver and forward
it to your connected HDMI sources.
Connect the IR cable (2 - on figure above) to the HD transmitter's con-
nector marked "IR''.
Make sure that the LED of the IR cable is attached exactly over the HDMI
source's infrared sensor (with some equipment,this needs to be done
very precisely). The exact position can be found easily by shining a torch
on the front panel, searching for the IR sensor window.
Please experiment with correct placement before final attachment of
the IR LED .
The adhesive strip may cause discoloration on certain surfaces, or leave
adhesive residues after removal.
Testing the IR return function
Once you have connected the IR cable according to the above descrip-
tion, it is recommended to test the function first.
Aim your remote control towards the IR on the front side of receiver and
send a command. The command will be transferred from the receiver to
the transmitter at the second location. The HDMI source should execute
the command sent by your remote control.
9.