Hideaway Beds Beta Bed Single Manual de instrucciones de montaje - Página 18

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Mobiliario interior Hideaway Beds Beta Bed Single. Hideaway Beds Beta Bed Single 20 páginas. Wallbed frame and cabinet system

Imprimir página

STEP 7: Install the Bed Face Panel in Cabinet (cont.)

Stand the Bed Face Panel on the Head end and align it just in front of the Tension

arms. Gently (do not bump the Torsion Arms) work the Side Rails into position

between the Torsion Arms. Carefully lift the Bed Face Panel approximately 4"

(100mm) or enough for the 5/16" (8mm) bolt loosely secured in hole #3 to drop into

the slot on the end of the Tension Arm. Repeat this procedure on both sides of the

Bed Face Panel.

Tilt the Bed Face Panel out until the arm locks disengage and the Allen socket head

bolt head, in hole #1, is seated in the notch at the bottom of the tension arm. Tighten

the 5/16" (8mm) bolts in holes #3 securely.

Install the 5/16" (8mm) bolts in holes #2 and securely tighten. Let the Bed Face Panel

close gently. Do not let it slam shut. Damage can be caused by slamming - especially

if the mattress is not in place.

ALERT: Place the mattress across the Bed Face Panel so it will not slam shut. If this

is not possible, your assistant must hold the panel down.

Side Panel

Drawing 14.

Bed Panel

Face

Head of Bolt

in Hole #3

Bolt Hole #2

Allen Bolt in

Hole #1

Side Panel

Bolt Hole #2

Allen Bolt in

Hole #1 seated

in notch

Drawing 15.

Bed Panel

Unit Rail

Bolt Hole #3

seated in slot

18.