DB Research DB Drive Euphoria EPS68 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Subwoofer DB Research DB Drive Euphoria EPS68. DB Research DB Drive Euphoria EPS68 8 páginas. 6x8" low profile amplified subwoofer
Power Connections
Connect the ground terminal to the closest point on the chassis of the vehicle.
Keep this ground wire to less than 39" (100 cm) in length. Use 8 gauge
(or heavier) wire.
Connect the remote terminal to the remote output of head unit using 16 gauge
( or heavier ) wire.
Connect an empty fuse holder within 18" (45 cm) of the car battery, and run 8 gauge
(or heavier) cable from this fuse to the amplifier location. Then connect the fuse
holder to the "BATT+" (+12V) connection on the subwoofer rear panel.
Fig.3
NOTE:
In this connection, the
AUTO TURN OFF switch is in the
ON position.
Fig.4
NOTE:
In this connection, the
AUTO TURN ON switch is in the
OFF position.
4
Battery
FUSE
Ch ass is
gr oun d
p oin t
to REMOTE TURN-ON
terminal of head unit
Battery
FUSE
Ch ass is
gr oun d
p oin t