DB Research DB Drive Euphoria EPS68 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DB Research DB Drive Euphoria EPS68. DB Research DB Drive Euphoria EPS68 8 pages. 6x8" low profile amplified subwoofer

Imprimer la page

Power Connections

Connect the ground terminal to the closest point on the chassis of the vehicle.

Keep this ground wire to less than 39" (100 cm) in length. Use 8 gauge

(or heavier) wire.

Connect the remote terminal to the remote output of head unit using 16 gauge

( or heavier ) wire.

Connect an empty fuse holder within 18" (45 cm) of the car battery, and run 8 gauge

(or heavier) cable from this fuse to the amplifier location. Then connect the fuse

holder to the "BATT+" (+12V) connection on the subwoofer rear panel.

Fig.3

NOTE:

In this connection, the

AUTO TURN OFF switch is in the

ON position.

Fig.4

NOTE:

In this connection, the

AUTO TURN ON switch is in the

OFF position.

Battery

FUSE

Ch ass is

gr oun d

p oin t

to REMOTE TURN-ON

terminal of head unit

Battery

FUSE

Ch ass is

gr oun d

p oin t