Dynamic DX-ECU Manual de instalación - Página 6

Navegue en línea o descargue pdf Manual de instalación para Unidad de control Dynamic DX-ECU. Dynamic DX-ECU 15 páginas. Environmental control unit

General

Installing an ECU requires the following steps:

1. Mounting and securing the ECU

2. Connecting the ECU to the rest of the DX system

3. Connecting devices to the ECU

Maximum environmental protection is achieved when the ECU is mounted with the

connectors facing down as shown.

Note :

The ECU is not inherently water proof and must be protected from water

ingress as appropriate to chair usage and mounting considerations.

Typically water proofing is achieved by a sensible choice of mounting

position and / or addition of a water shielding cover.

The ECU should be mounted in a position that is not exposed to

mechanical abuse.

Recommended Mounting Orientation

GBK64227 - Issue 3 : August 1998