Dynamic DX-ECU Manuel d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dynamic DX-ECU. Dynamic DX-ECU 15 pages. Environmental control unit

Imprimer la page

General

Installing an ECU requires the following steps:
1. Mounting and securing the ECU
2. Connecting the ECU to the rest of the DX system
3. Connecting devices to the ECU

Mounting

Environmental Protection

Maximum environmental protection is achieved when the ECU is mounted with the
connectors facing down as shown.
Note :
The ECU is not inherently water proof and must be protected from water
ingress as appropriate to chair usage and mounting considerations.
Typically water proofing is achieved by a sensible choice of mounting
position and / or addition of a water shielding cover.
The ECU should be mounted in a position that is not exposed to
mechanical abuse.
4
Recommended Mounting Orientation
© Copyright Dynamic Controls Ltd. 1998
GBK64227 - Issue 3 : August 1998