Aire WELKIN Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Ventilador Aire WELKIN. Aire WELKIN 17 páginas.

OPERATING THE REMOTE CONTROL / WALL CONTROL

Note: The auto learning function will only mandate within 60 seconds when

turning the fan's AC power ON.

1. Select desired frequency from the back of transmitter.

2. Press the transmitter's "Off" button, and hold the "Off" button for over 10

seconds. Once the receiver has detected the frequency, the down light of

your fan if applicable will blink twice. (There is no indication if your fan is not

equipped with a light).

Note: The learning frequency function will continue to retain the last set

frequency even when the AC power is shut off.

The DC motor has a built in safety feature against obstruction during operation,

if the fan motor senses a obstruction for 60 seconds or more it will get locked

and will not rotate until the obstruction has been removed and the power has

been disconnected for 5 seconds.

3. Over 60W protection: When the receiver detects motor power consumption

which is greater than 60W, the receiver's power will stop and operation will

be immediately discontinued. if you want to re-start the fan, Please remove

obstacles and disconnect the power by turning off the circuit breaker . And

turn the power on after 5 seconds.

4. "DIMMER" and "ON/OFF" dip switch:

The "DIMMER" selection is the light dimmable selection and is to be used

with all bulbs except for CFL bulbs. The"ON/OFF" selection is For CFL bulbs.

Fig. 18