HiFiMAN HE-560 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Auriculares HiFiMAN HE-560. HiFiMAN HE-560 8 páginas.
También para HiFiMAN HE-560: Manual del usuario (12 páginas), Manual del usuario (8 páginas), Manual del usuario (8 páginas)
Imprimir página
www.hifiman.com
Set-up and Operation
1. Please allow at least 150 hours of constant use for break-in of your
new headphone. This break-in period does not have to be at high
volume.
2. To connect your headphones to an amplifier, please use the
supplied cabling. The mini-coax plug with the red dot goes to the right
side marked with R. (Depending on the cable in use, the cable itself
can also show L and R on the plugs.) Push the connector straight onto
the socket and then use your fingers to tighten the washer. When
tightening, please make sure to move the washer only and not the
cable as such. A loose connection can lead to drop outs and distortion.
Repeat the process with the other mini-coax connector.
3. The supplied cable adapter with the large ¼" (6.35mm) jack is
connected with the typical headphone output of an amplifier or even
better with a headphone amplifier. Please be aware that many home
amplifiers will switch off the loudspeaker output when a headphone is
connected.
4. To clean your headphone, please use a soft, slightly damp cloth only.
Do not use any detergents and make sure not to let any fluid enter the
open sides of the headphone. The leather headband can be
maintained using standard leather care products. When your earpads
become worn and no longer offer a good connection to your skull,
you should replace them with new ones which can be supplied from
your dealer. Note: The internal drivers do not require maintenance.
Any attempt to remove or modify them will void your warranty.