Galanz JCMJ913S2AW-10 Manual de instrucciones - Página 15
Navegue en línea o descargue pdf Manual de instrucciones para Horno microondas Galanz JCMJ913S2AW-10. Galanz JCMJ913S2AW-10 16 páginas. Air fry microwave
Imprimir página
OVERHEATING PROTECTION: When the system enters into super high temperature protection
status, the digital display shows "E03" and continues to beep. After pressing STOP/CANCEL
button, the system comes back to normal standby mode. (except microwave function).
LOW TEMPERATURE PROTECTION: When the system enters into super low temperature
protection status, the digital display shows "E04" and continues to beep. After pressing
STOP/CANCEL button, the system comes back to normal standby mode. (except microwave
function).
SENSOR MALFUNCTION PROTECTION: The system enters into protection mode when the
system sensor is open circuited or short circuited. The display shows "E05" or "E06" and buzzer
makes alarm sound. After pressing STOP/CANCEL button, the system comes back to normal
standby mode. (except microwave function).
BUTTON ADHESION PROTECTION: In any state, if any button on the control panel is adhesion
for 60 seconds, the program stops working immediately, the display shows "FAIL" and the
system will sound beep. If the button is adhesion all the time, beep will sound every one minute.
Any button is invalid at this time. After troubleshooting, press the STOP/CANCEL button to
return standby mode (except for the microwave function).
1. Turn off the oven and unplug the power cord from the wall when cleaning.
2. Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls,
wipe with a damp cloth. Mild detergents may be used if the oven gets very dirty. Avoid using
spray or other harsh cleaners. They may stain, streak or dull the door surface.
3. The outside of the oven should be cleaned with a damp cloth. To prevent damage to the
operating parts inside the oven, water should not be allowed to seep into the ventilation
openings.
4. Wipe the door and window on both sides, the door seals and adjacent parts frequently with a
damp cloth to remove any spills or spatters. Do not use abrasive cleaner.
5. Do not allow the control panel to become wet. Clean with a soft, damp cloth. When cleaning the
control panel, leave oven door open to prevent oven from accidentally turning on.
6. If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This
may occur when the microwave oven is operated under high humidity condition. And it is normal.
7. It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy
water or in a dishwasher.
8. The roller ring and oven floor should be cleaned regularly to avoid excessive noise. Simply wipe
the bottom surface of the oven with mild detergent. The roller ring may be washed in mild, soapy
water or in a dishwasher. When removing the roller ring, be sure to replace it in the proper position.
9. Remove odors from your oven by combining a cup of water with the juice and skin of one lemon
in a microwaveable bowl. Microwave for 5 minutes. Wipe thoroughly and dry with a soft cloth.
10. The oven should be cleaned regularly and any food deposits should be removed. Failure to
maintain the oven in a clean condition could lead to deterioration of surface that could adversely
affect the life of the unit and could possibly result in a hazardous situation.
PROTECTION
CLEANING AND CARE
14