Galanz JCMJ913S2AW-10 Gebruiksaanwijzing - Pagina 15

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Galanz JCMJ913S2AW-10. Galanz JCMJ913S2AW-10 16 pagina's. Air fry microwave

OVERHEATING PROTECTION: When the system enters into super high temperature protection

status, the digital display shows "E03" and continues to beep. After pressing STOP/CANCEL

button, the system comes back to normal standby mode. (except microwave function).

LOW TEMPERATURE PROTECTION: When the system enters into super low temperature

protection status, the digital display shows "E04" and continues to beep. After pressing

STOP/CANCEL button, the system comes back to normal standby mode. (except microwave

function).

SENSOR MALFUNCTION PROTECTION: The system enters into protection mode when the

system sensor is open circuited or short circuited. The display shows "E05" or "E06" and buzzer

makes alarm sound. After pressing STOP/CANCEL button, the system comes back to normal

standby mode. (except microwave function).

BUTTON ADHESION PROTECTION: In any state, if any button on the control panel is adhesion

for 60 seconds, the program stops working immediately, the display shows "FAIL" and the

system will sound beep. If the button is adhesion all the time, beep will sound every one minute.

Any button is invalid at this time. After troubleshooting, press the STOP/CANCEL button to

return standby mode (except for the microwave function).

1. Turn off the oven and unplug the power cord from the wall when cleaning.

2. Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls,

wipe with a damp cloth. Mild detergents may be used if the oven gets very dirty. Avoid using

spray or other harsh cleaners. They may stain, streak or dull the door surface.

3. The outside of the oven should be cleaned with a damp cloth. To prevent damage to the

operating parts inside the oven, water should not be allowed to seep into the ventilation

openings.

4. Wipe the door and window on both sides, the door seals and adjacent parts frequently with a

damp cloth to remove any spills or spatters. Do not use abrasive cleaner.

5. Do not allow the control panel to become wet. Clean with a soft, damp cloth. When cleaning the

control panel, leave oven door open to prevent oven from accidentally turning on.

6. If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This

may occur when the microwave oven is operated under high humidity condition. And it is normal.

7. It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy

water or in a dishwasher.

8. The roller ring and oven floor should be cleaned regularly to avoid excessive noise. Simply wipe

the bottom surface of the oven with mild detergent. The roller ring may be washed in mild, soapy

water or in a dishwasher. When removing the roller ring, be sure to replace it in the proper position.

9. Remove odors from your oven by combining a cup of water with the juice and skin of one lemon

in a microwaveable bowl. Microwave for 5 minutes. Wipe thoroughly and dry with a soft cloth.

10. The oven should be cleaned regularly and any food deposits should be removed. Failure to

maintain the oven in a clean condition could lead to deterioration of surface that could adversely

affect the life of the unit and could possibly result in a hazardous situation.

PROTECTION

CLEANING AND CARE