Autonics TZ Series Manual del producto - Página 2

Navegue en línea o descargue pdf Manual del producto para Controlador Autonics TZ Series. Autonics TZ Series 6 páginas. Dual pid control temperature controller
También para Autonics TZ Series: Manual (16 páginas), Manual (16 páginas), Manual (17 páginas), Manual (17 páginas)

Imprimir página

• Do not use the unit for other purpose (e.g. voltmeter, ammeter), but temperature

controller.

• When changing the input sensor, turn off the power first before changing. After changing

the input sensor, modify the value of the corresponding parameter.

• Do not overlapping communication line and power line. Use twisted pair wire for

communication line and connect ferrite bead at each end of line to reduce the effect of

external noise.

• Make a required space around the unit for radiation of heat. For accurate temperature

measurement, warm up the unit over 20 min after turning on the power.

• Make sure that power supply voltage reaches to the rated voltage within 2 sec after

supplying power.

• Do not wire to terminals which are not used.

• This unit may be used in the following environments.

- Indoors (in the environment condition rated in 'Specifications')

- Altitude Max. 2,000 m

- Pollution degree 2

- Installation category II

Ordering Information

This is only for reference, the actual product does not support all combinations.

For selecting the specified model, follow the Autonics website .

TZ / TZN 4 ❶ - ❷ 4 ❸

❶ Size

S: DIN W 48 × H 48 mm (TZN Series)

SP: DIN W 48 × H 48 mm (11 pin type, TZ Series)

ST: DIN W 48 × H 48 mm (TZ Series)

M: DIN W 72 × H 72 mm

H: DIN W 48 × H 96 mm

W: DIN W 96 × H 48 mm

L: DIN W 96 × H 96 mm

❷ Option output

PN Option output 1 Option output 2

Event

PV Transmission

Event

Communication

Event

Event + PV Transmission

Event

Event + Communication

Manual

For proper use of the product, refer to the manuals and be sure to follow the safety

considerations in the manuals.

Download the manuals from the Autonics website.

Software

Download the installation file and the manuals from the Autonics website.

■ DAQMaster

DAQMaster is comprehensive device management program. It is available for

parameter setting, monitoring.

Product Components

• Product, bracket × 2

[TZ4SP, TZ4ST, TZN4S] Product (+ bracket)

Sold Separately

• 11 pin socket: PG-11, PS-11 (N)

❸ OUT1 Control output

R: Relay output

S: SSR drive output

C: Current Output

• Instruction manual

• Unit sticker

• Communication converter: SCM Series

Specifications

Series

TZ/TZN Series

Power supply

100 - 240 VACᜠ 50/60 Hz ±10%

Power consumption

≤ 6 VA, TZ4SP, TZ4ST, TZN4S: ≤ 5 VA

Sampling period

500 ms

Input specification

Refer to 'Input Type and Using Range'.

Display accuracy

F.S. ±0.3% or 3℃ higher one

Relay

250 VACᜠ 3 A, 30 VDCᜡ 3 A 1c

Control

SSR

12 VDCᜡ±3 V, ≤ 30 mA

output

Current

DC 4-20 mA, load resistance: ≤ 600 Ω

Event 1/2

250 VACᜠ 1A 1a

Option

DC 4 - 20 mA, load resistance: ≤ 600 Ω

output

Transmission

Comm.

RS485

Display type

7 Segment (red, green), LED type

Control type

ON/OFF, P, PI, PD, PIDF, PIDS control

Alarm output

1 to 100 (0.1 to 100.0) ℃

Hysteresis

Proportional band (P)

0.0 to 100.0%

Integral time (I)

0 to 3,600 sec

Derivative time (D)

0 to 3,600 sec

Control cycle (T)

1 to 120 sec

LBA setting

1 to 999 sec

RAMP setting

Ramp Up, Ramp Down: 1 to 99 min

• Control output: ≥ 10,000,000 operations

Mechanical

• Option output: ≥ 20,000,000 operations

Relay

• Control output: ≥ 100,000 operations

life

(load resistance: 250 VACᜠ 3 A)

cycle

Electrical

• Option output: ≥ 500,000 operations

(load resistance: 250 VACᜠ 1 A)

Between input terminal and power terminal: 2,000 VACᜠ 50/60 Hz

Dielectric strength

for 1 min

0.75 mm amplitude at frequency of 10 to 55Hz (for 1min) in each X, Y,

Vibration

Z direction for 2 hours

0.5 mm amplitude at frequency of 10 to 55Hz (for 1min) in each X, Y,

Malfunction vibration

Z direction for 2 hours

Insulation resistance

≥ 100 MΩ (500 VDCᜡ megger)

±2 kV square shaped noise by noise simulator (pulse width 1 ㎲)

Noise immunity

R-phase, S-phase

Memory retention

≈ 10 years (non-volatile semiconductor memory type)

Ambient temperature

-10 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation)

Ambient humidity

35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation)

Approval

ᜢ ᜧ ᜫ

• TZ4SP: ≈ 144 g (≈ 205 g)

• TZ4ST: ≈ 162 g (≈ 218 g)

• TZ4M: ≈ 228 g (≈ 360 g)

Unit weight

(packaged)

• TZ4W: ≈ 246 g (≈ 365 g)

• TZ4H: ≈ 246 g (≈ 365 g)

• TZ4L: ≈ 304 g (≈ 474 g)

Communication Interface

■ RS485

Comm. protocol

BCC

Application standard

EIA RS485 compliance with

Maximum connection

31 units (address: 01 to 99)

Synchronous method

Asynchronous

Comm. method

Two-wire half duplex

Comm. effective range ≤ 1,200 m

2,400 / 4,800 / 9,600 bps (parameter)

Comm. speed

Start bit

1 bit (fixed)

Data bit

8 bit (fixed)

Parity bit

None

Stop bit

1 bit (fixed)

EEPROM life cycle

≈ 1,000,000 operations (Erase / Write)

• TZN4S: ≈ 164 g (≈ 226 g)

• TZN4M: ≈ 246 g (≈ 355 g)

• TZN4W: ≈ 232 g (≈ 351 g)

• TZN4H: ≈ 232 g (≈ 351 g)

• TZN4L: ≈ 303 g (≈ 474 g)