909 RH600HT Manual de instrucciones - Página 11
Navegue en línea o descargue pdf Manual de instrucciones para Recortadora 909 RH600HT. 909 RH600HT 12 páginas. 600w 660mm hedge trimmer with rotating handle
Imprimir páginaCleaning and storage
Ensure all nuts, bolts and screws are tight and that the
hand guard (2) is fitted correctly.
All damaged and worn parts should be replaced in order to
maintain the hedge trimmer in a safe working condition.
Keep the tool's air vents unclogged and clean at all times.
Remove dust and dirt regularly. Cleaning is best done with
compressed air or a rag. Never use caustic agents to clean
plastic parts.
CAUTION.
Do not use cleaning agents to clean the plastic
parts of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact with
the tool.
Special care should be taken when cleaning and adjusting
the blades. This should only be done with the Hedge
Trimmer switched off and disconnected from the mains
supply to prevent injury.
The hedge trimmer should always be stored with the blade
guard fitted and secured in place.
Store the tool, instruction manual and accessories in a
secure and dry place.
Ensure the cable and any
extension cable used are
checked for damage and are
coiled correctly without kinks.
Never spray the machine
down with water and keep dry
at all times.
When not in use the hedge trimmer can be hung on the wall
with a suitable screw and dowel.
Power cord maintenance
If the supply cord needs replacing, the task must be carried
out by the manufacturer, the manufacturer's agent, or an
authorised service centre in order to avoid a safety hazard.
11