Autonics MX4W Series Manual del producto - Página 2

Navegue en línea o descargue pdf Manual del producto para Instrumentos de medida Autonics MX4W Series. Autonics MX4W Series 6 páginas. Lcd multi panel meters

Imprimir página
Autonics MX4W Series Manual del producto

Ordering Information

This is only for reference, the actual product does not support all combinations.
For selecting the specified model, follow the Autonics webstie.
MX
4
W
-
❶
-
❶ Input type
V: DC / AC voltage
A: DC / AC current
Product Components
• Product
• Bracket × 2
Dimensions
• Unit: mm, For the detailed drawings, follow the Autonics website.
91.5
96
■ Bracket
■ Panel cut-out
4.9
36
3
■ Terminal cover
93.7
Cautions during Wiring
• Unit: mm, Use terminals of size specified
below.
≥3.0
≤6.0
F
❷
❷ Preset output
N: Indicator
1: NPN open collector
2: PNP open collector
• Instruction manual
• Terminal cover × 1
4 20
≥ 116
92
+0.8
0
15.9
• Input and output are insulated from the
power.
Option output
ADC input
and
circuit and
hold / zero
display part
1
2
3
4
5
6
7
Connections
■ Input
• For using DC power, connect wires regardless of polarity.
• Indicator model does not have the hold / zero terminal.
HOLD / ZERO
1
2
3
4
MX4W-V-F□
± 500 mVDCᜡ / ± 200 mVDCᜡ /
DC
± 50 mVDCᜡ
①
0 - 500 mVACᜠ / 0 - 200 mVACᜠ /
AC
0 - 50 mVACᜠ
± 20 VDCᜡ / ± 5 VDCᜡ / 1 - 5 VDCᜡ /
DC
± 2 VDCᜡ
②
AC
0 - 20 VACᜠ / 0 - 5 VACᜠ / 0 - 2 VACᜠ
DC ± 500 VDCᜡ / ± 200 VDCᜡ / ± 50 VDCᜡ
③
0 - 500 VACᜠ / 0 - 200 VACᜠ /
AC
0 - 110 VACᜠ / 0 - 50 VACᜠ
■ Output
• 1: NPN open collector
1
2
3
OUT1
OUT2
COM
Specifications
Model
Input type
Max. allowable input
+DC input
-DC input
AC input
Display method
Display accuracy
23 ± 5 ℃ (DC input)
23 ± 5 ℃ (AC input)
0 to 50 ℃
Display cycle
Display scale
A / D conversion method ΣΔ (Sigma Delta) analog-to-digital converter
Power
Sampling cycle
(DC input)
8
9 10
Sampling cycle
(AC input)
Resolution
Preset output
Load voltage
Load current
Residual voltage
Unit weight (packaged) ≈ 77 g (≈ 100 g)
Approval
01)  When using the unit at low temperature (below 0 ℃), display cycle is slow due to charateristics of LCD. Control
output operates normally.
02) 5 A terminal: ± 0.3 % F.S. rdg ± 3-digit
03) 5 A terminal: ± 1 % F.S. rdg ± 3-digit
Power supply
Power consumption
Insulation resistance
Dielectric strength
Noise immunity
Vibration
Vibration
(malfunction)
Shock
Shock (malfunction)
Ambient temperature
Ambient humidity
Insulation type
SOURCE
24 - 240 VACᜠ/ VDCᜡ
5
6
7
8
9
10
①
②
③
COM
MX4W-A-F□
± 20 mA / 4 - 20 mA / ± 5 mA / ± 2 mA
0 - 20 mA / 0 - 5 mA / 0 - 2 mA
± 500 mA / ± 200 mA / ± 50 mA
0 - 500 mA / 0 - 200 mA / 0 - 50 mA
± 5 A / ± 2 A
0 - 5 A / 0 - 2 A
• 2: PNP open collector
4
1
2
HOLD/
ZERO
OUT1
OUT2
MX4W-V-F□
DC / AC voltage
Dependent on the input type
≈ -10 to 110 % F.S. for each measured input range
≈ -110 to 110 % F.S. for each measured input range
≈ 110 % F.S. for each measured input range
12-segment LCD
01)
- measurement value display part: white, character height: 19 mm
- other display parts: red, green, yellow (indicator: white)
Dependent on the ambient temperature
± 0.1 % F.S. rdg ± 2-digit
± 0.3 % F.S. rdg ± 3-digit
± 0.5 % F.S. rdg ± 3-digit
0.2 to 5.0 sec (select per 0.1 sec)
-9999 to 9999 (4-digit)
50 ms
16.6 ms
1 / 20,000
NPN / PNP open collector output model
≤ 30 VDCᜡ
≤ 100 mA
NPN open collector output: ≤ 1 VDCᜡ /
PNP open collector output: ≤ 2 VDCᜡ
ᜢ ᜧ
24 - 240 VDCᜡ ± 10 %, 24 - 240 VACᜠ ± 10 % 50 / 60 Hz
DC: ≤ 3 W, AC: ≤ 5 VA
≥ 100 MΩ (500 VDCᜡ megger)
Between all terminals and case: 3,000 VACᜠ 50 / 60 Hz for 1 min
± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1
minute) in each X, Y, Z direction for 2 hours
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute)
in each X, Y, Z direction for 10 min
300 m/s
(≈ 30 G) in each X, Y, Z direction for 3 times
2
100 m/s
(≈ 10 G) in each X, Y, Z direction for 3 times
2
-10 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation)
35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
Symbol:
, double or reinforced insulation (dielectric strength
between the measurement input part and the power part: 1 kV)
3
4
HOLD/
COM
ZERO
MX4W-A-F□
DC / AC current
± 0.1 % F.S. rdg ± 2-digit
02)
± 0.3 % F.S. rdg ± 3-digit
± 0.5 % F.S. rdg ± 3-digit
03)