dynarex 12001 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Equipamiento médico dynarex 12001. dynarex 12001 8 páginas. Long-term care bed

ASSEMBLY INSTRUCTIONS

2.7 INSTALLING THE FOOTBOARD

WITH STAFF CONTROL

1. Unplug the bed from the outlet prior to installation.

2. Mount the footboard with built-in staff control.

3. Open the locking lid of the control box to expose

the port connections.

4. Disconnect the hand pendant connection to the

control box and replace it with a cable splitter.

(Continued)

5. Lift up the lid on one of the splitter ports and plug

in the hand pendant. Push down the lid to secure

the connections.

6. Repeat the procedure and plug the cord from the

staff control footboard into the other splitter port.

Use the included zip ties to secure the cord to the

bed frame. Ensure the cord does not interfere with

the bed operation.

7. Reinstate the control box locking lid. There should

be an audible click.

8. Plug the bed into an appropriate outlet and test

functions to ensure all functions work correctly.

Long-Term Care Bed • D100 (Reorder No. 12001)

ASSEMBLY INSTRUCTIONS

2.8 INSTALLING THE BATTERY

BACKUP

1. Unplug the bed when installing the backup battery.

2. Affi x the battery backup with nuts and bolts to the

side of the control box, on the same holding plate.

Long-Term Care Bed • D100 (Reorder No. 12001)

(Continued)

3. Open the control box locking lid by pressing in the

sides and lift it up, to expose the connection parts.

4. Connect the back up battery cord to the control

box. The connection port is indicated with a bat-

tery symbol above.

5. Close the locking lid, there should be a audible

click, switch the power supply back on.