DC MONT DC-MPPT-MPK2-60A Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Controlador DC MONT DC-MPPT-MPK2-60A. DC MONT DC-MPPT-MPK2-60A 17 páginas. Mppt controller

MONT

INSTALLATION

Choose a mounting location on a vertical surface which should be protected from direct sunlight,

high temperatures, and water. Make sure there is good ventilation.

Verify that there is sufficient room to run wires, as well as clearance above and below the controller

for ventilation. The clearance should be at least 6 inches (150mm).

Secure the controller on the mounting location.

Switch off the air switch or fuse of the battery, solar panel and load.

Connect the battery to the battery terminals on the controller.

Connect the solar panel to the solar panel terminals on the controller.

Connect the load to the load terminals on the controller.

Switch on the fuse of the battery first, then the air switch of the solar panel, finally the fuse of the load.

Remote

Temperature

Sensor

BLUE TOOTH

Air-switch

Fuse

12V Battery