DC MONT DC-MPPT-MPK2-60A User Manual - Page 4

Browse online or download pdf User Manual for Controller DC MONT DC-MPPT-MPK2-60A. DC MONT DC-MPPT-MPK2-60A 17 pages. Mppt controller

Print Page
DC MONT DC-MPPT-MPK2-60A User Manual
MONT

INSTALLATION

Choose a mounting location on a vertical surface which should be protected from direct sunlight,
high temperatures, and water. Make sure there is good ventilation.
Verify that there is sufficient room to run wires, as well as clearance above and below the controller
for ventilation. The clearance should be at least 6 inches (150mm).
Secure the controller on the mounting location.
Switch off the air switch or fuse of the battery, solar panel and load.
Connect the battery to the battery terminals on the controller.
Connect the solar panel to the solar panel terminals on the controller.
Connect the load to the load terminals on the controller.
Switch on the fuse of the battery first, then the air switch of the solar panel, finally the fuse of the load.
Remote
Temperature
Sensor
BLUE TOOTH
Air-switch
Fuse
Fuse
12V Battery