activTek INDUCT 2000 Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Limpiador de aire activTek INDUCT 2000. activTek INDUCT 2000 9 páginas. Electronic air purification system
También para activTek INDUCT 2000: Manual del usuario (16 páginas)
Imprimir página
FIBERGLASS DUCTWORK INSTALLATION
1
1. Locate suitable area
of duct for installation.
3
3. Cut hole in duct using 3.5" hole saw.
ALTERNATIVE CUTTING METHOD
a
a. Using template, mark 4 holes on duct.
c
c. Cut between holes using a utility knife.
Continue with #4 (above)
6
2
2. Mark location for 3.5" opening using either the
mounting plate or included template. Also mark
the locations of 4 screw holes in corners (see
template).
4
4. Drill 4 holes (at corner screw locations) using
a 3/8" drill bit.
b
b. Draw a line between each corner mark.
7