activTek INDUCT 2000 Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Очиститель воздуха activTek INDUCT 2000. activTek INDUCT 2000 9 страниц. Electronic air purification system
Также для activTek INDUCT 2000: Руководство пользователя (16 страниц)
Печатать страницу
FIBERGLASS DUCTWORK INSTALLATION
1
1. Locate suitable area
of duct for installation.
3
3. Cut hole in duct using 3.5" hole saw.
ALTERNATIVE CUTTING METHOD
a
a. Using template, mark 4 holes on duct.
c
c. Cut between holes using a utility knife.
Continue with #4 (above)
6
2
2. Mark location for 3.5" opening using either the
mounting plate or included template. Also mark
the locations of 4 screw holes in corners (see
template).
4
4. Drill 4 holes (at corner screw locations) using
a 3/8" drill bit.
b
b. Draw a line between each corner mark.
7