Autonics PR Series Manual del producto - Página 2

Navegue en línea o descargue pdf Manual del producto para Sensores de seguridad Autonics PR Series. Autonics PR Series 6 páginas. Cylindrical inductive proximity sensors

Imprimir página
Autonics PR Series Manual del producto

Ordering Information

This is only for reference, the actual product does not support all combinations.
For selecting the specified model, follow the Autonics website.
PR
❶
❷
❸
❹
❶ Characteristic
No mark: General type
A: Spatter-resistant type
❷ Connection
No mark: Cable type
W: Cable connector type
CM: Connector type
❸ Body length
No mark: Normal
L: Long
❹ DIA. of sensing side
Number: DIA. of sensing side (unit: mm)
Product Components
• Product × 1
• Instruction manual × 1
Sold Separately
• M12 Connector: C□A(H)2-□
• Fixing bracket: P90-R□
Connections
• LOAD can be wired to any direction.
• Connect LOAD before suppling the power.
■ Cable type
Brown
Blue
■ Cable connector type / Connector type
• For LOAD connection, follow the cable type connection.
• Fasten the connector not to shown the thread. (0.39 to 0.49 N m)
• Fasten the vibration part with PTFE tape.
2
1
3
4
■ Inner circuit
Operation Timing Chart
Normally open
Presence
Sensing target
Nothing
Operation
Load
Return
ON
Operation
indicator (red)
OFF
-
❺
❻
❼
❺ Sensing distance
Number: Sensing distance (unit: mm)
❻ Power supply
A: 100 - 240 VACᜠ
❼ Control output
O: Normally Open
C: Normally Closed
• Nut × 2
• Washer × 1
• Spatter protection cover: P90-M□
LOAD
100 - 240 VACᜠ
50/60 Hz
LOAD
Pin
Color
Function
①
-
-
②
-
-
③
Blue
100 - 240 VACᜠ
50 / 60 Hz
④
Brown
LOAD
LOAD
Normally closed
Presence
Nothing
Operation
Return
ON
OFF

Specifications

Installation
Flush type
General
PR□12-2A□
Spatter-resistant PRA□12-2A□
DIA. of sensing
Ø 12 mm
side
Sensing distance 2 mm
0 to 1.4 mm
Setting distance
Hysteresis
≤ 10 % of sensing distance
Standard sensing
12 × 12 × 1 mm
target: iron
Response
20 Hz
frequency
01)
Affection by
≤ ± 10 % for sensing distance at ambient temperature 20 ℃
temperature
Indicator
Operation indicator (red)
Approval
ᜢ ᜽ ᜫ
Installation
Non-flush type
General
PR□12-4A □
DIA. of sensing
Ø 12 mm
side
Sensing distance 4 mm
Setting distance
0 to 2.8 mm
Hysteresis
≤ 10 % of sensing distance
Standard sensing
12 × 12 × 1 mm
target: iron
Response
20 Hz
frequency
01)
Affection by
≤ ± 10 % for sensing distance at ambient temperature 20 ℃
temperature
Indicator
Operation indicator (red)
Approval
ᜢ ᜽ ᜫ
01) The response frequency is the average value. The standard sensing target is used and the width is set as
2 times of the standard sensing target, 1/2 of the sensing distance for the distance.
Unit weight (package)
Ø 12 mm
Normal
≈ 72 g (≈ 84 g)
Cable
Long
-
Normal
≈ 42 g (≈ 54 g)
Cable
connector
Long
-
Normal
≈ 30 g (≈ 42 g)
Connector
Long
-
01)  Spatter-resistant type: ≈ 66 g (≈ 78 g)
02)  Spatter-resistant type: ≈ 106 g (≈ 118 g)
Power supply
100 - 240 VACᜠ 50 / 60 Hz, operating voltage: 85 - 264 VACᜠ
Leakage current
≤ 2.5 mA
DIA. of sensing side Ø 12 mm: 5 to 150 mA
Control output
DIA. of sensing side Ø 18 mm, Ø 30 mm: 5 to 200 mA
Residual voltage
≤ 10 V
Protection circuit
Surge protection circuit
Insulation resistance
≥ 50 MΩ (500 VDCᜡ megger)
Double insulation or reinfored insulation (symbol:
Insulation type
dielectric strength between the measuring input part and the power
part: general type 1 kV, spatter-resistant type 1.5 kV
General type
: 2,500 VACᜠ 50/60 Hz for 1 min (between the charging part and the case)
Dielectric strength
Spatter-resistant type
: 1,500 VACᜠ 50/60 Hz for 1 min (between the charging part and the case)
1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z
Vibration
direction for 2 hours
Shock
500 m/s² (≈ 50 G)
Ambient temperature -25 to 70 ℃, storage: -30 to 80 ℃ (no freezing or condensation)
Ambient humidity
35 to 95 %RH, storage: 35 to 95 %RH (no freezing or condensation)
Protection structure
IP67 (IEC standards)
Connection
Cable type / Cable connector type
DIA. of sensing side Ø 12 mm: Ø 4 mm, 2-wire
Cable spec.
02)
DIA. of sensing side Ø 18 mm, Ø 30 mm: Ø 5 mm, 2-wire
Wire spec.
AWG 22 (0.08 mm, 60-core), insulator diameter: Ø 1.25 mm
Connector spec.
M12 connector
Material
Standard type cable (black): polyvinyl chloride (PVC)
Case/Nut: nickel plated brass, washer: nickel plated iron,
General
sensing side: PBT
Case/Nut: PTFE coated brass, washer: PTFE coated iron,
Spatter-resistant
sensing side: PTFE
01)  Except spatter-resistant type
02)  Cable type: 2 m, cable connector type: 300 mm
PR□18-5A□
PR□30-10A□
PRA□18-5A□
PRA□30-10A□
Ø 18 mm
Ø 30 mm
5 mm
10 mm
0 to 3.5 mm
0 to 7 mm
18 × 18 × 1 mm
30 × 30 × 1 mm
PR□18-8A □
PR□30-15A □
Ø 18 mm
Ø 30 mm
8 mm
15 mm
0 to 5.6 mm
0 to 10.5 mm
25 × 25 × 1 mm
45 × 45 × 1 mm
Ø 18 mm
Ø 30 mm
≈ 118 g (≈ 130 g)
≈ 170 g (≈ 207 g)
01)
02)
≈ 130 g (≈ 142 g)
≈ 208 g (≈ 245 g)
≈ 66 g (≈ 78 g)
≈ 122 g (≈ 134 g)
≈ 78 g (≈ 90 g)
≈ 158 g (≈ 195 g)
≈ 54 g (≈ 66 g)
≈ 142 g (≈ 154 g)
≈ 66 g (≈ 78 g)
≈ 182 g (≈ 194 g)
)
for 3 times
in each X, Y, Z direction
/ Connector type
model
01)
01)