- ページ 2

セキュリティセンサー Autonics PR SeriesのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Autonics PR Series 6 ページ。 Cylindrical inductive proximity sensors

ページを印刷する

Ordering Information

This is only for reference, the actual product does not support all combinations.

For selecting the specified model, follow the Autonics website.

❶

❷

❸

❹

❶ Characteristic

No mark: General type

A: Spatter-resistant type

❷ Connection

No mark: Cable type

W: Cable connector type

CM: Connector type

❸ Body length

No mark: Normal

L: Long

❹ DIA. of sensing side

Number: DIA. of sensing side (unit: mm)

Product Components

• Product × 1

• Instruction manual × 1

Sold Separately

• M12 Connector: C□A(H)2-□

• Fixing bracket: P90-R□

Connections

• LOAD can be wired to any direction.

• Connect LOAD before suppling the power.

■ Cable type

Brown

Blue

■ Cable connector type / Connector type

• For LOAD connection, follow the cable type connection.

• Fasten the connector not to shown the thread. (0.39 to 0.49 N m)

• Fasten the vibration part with PTFE tape.

■ Inner circuit

Operation Timing Chart

Normally open

Presence

Sensing target

Nothing

Operation

Load

Return

Operation

indicator (red)

OFF

❺

❻

❼

❺ Sensing distance

Number: Sensing distance (unit: mm)

❻ Power supply

A: 100 - 240 VACᜠ

❼ Control output

O: Normally Open

C: Normally Closed

• Nut × 2

• Washer × 1

• Spatter protection cover: P90-M□

LOAD

100 - 240 VACᜠ

50/60 Hz

LOAD

Color

Function

①

②

③

Blue

100 - 240 VACᜠ

50 / 60 Hz

④

Brown

LOAD

Normally closed

Presence

Nothing

Operation

Return

OFF

Specifications

Installation

Flush type

General

PR□12-2A□

Spatter-resistant PRA□12-2A□

DIA. of sensing

Ø 12 mm

side

Sensing distance 2 mm

0 to 1.4 mm

Setting distance

Hysteresis

≤ 10 % of sensing distance

Standard sensing

12 × 12 × 1 mm

target: iron

Response

20 Hz

frequency

01)

Affection by

≤ ± 10 % for sensing distance at ambient temperature 20 ℃

temperature

Indicator

Operation indicator (red)

Approval

ᜢ ᜽ ᜫ

Installation

Non-flush type

General

PR□12-4A □

DIA. of sensing

Ø 12 mm

side

Sensing distance 4 mm

Setting distance

0 to 2.8 mm

Hysteresis

≤ 10 % of sensing distance

Standard sensing

12 × 12 × 1 mm

target: iron

Response

20 Hz

frequency

01)

Affection by

≤ ± 10 % for sensing distance at ambient temperature 20 ℃

temperature

Indicator

Operation indicator (red)

Approval

ᜢ ᜽ ᜫ

01) The response frequency is the average value. The standard sensing target is used and the width is set as

2 times of the standard sensing target, 1/2 of the sensing distance for the distance.

Unit weight (package)

Ø 12 mm

Normal

≈ 72 g (≈ 84 g)

Cable

Long

Normal

≈ 42 g (≈ 54 g)

Cable

connector

Long

Normal

≈ 30 g (≈ 42 g)

Connector

Long

01) Spatter-resistant type: ≈ 66 g (≈ 78 g)

02) Spatter-resistant type: ≈ 106 g (≈ 118 g)

Power supply

100 - 240 VACᜠ 50 / 60 Hz, operating voltage: 85 - 264 VACᜠ

Leakage current

≤ 2.5 mA

DIA. of sensing side Ø 12 mm: 5 to 150 mA

Control output

DIA. of sensing side Ø 18 mm, Ø 30 mm: 5 to 200 mA

Residual voltage

≤ 10 V

Protection circuit

Surge protection circuit

Insulation resistance

≥ 50 MΩ (500 VDCᜡ megger)

Double insulation or reinfored insulation (symbol:

Insulation type

dielectric strength between the measuring input part and the power

part: general type 1 kV, spatter-resistant type 1.5 kV

General type

: 2,500 VACᜠ 50/60 Hz for 1 min (between the charging part and the case)

Dielectric strength

Spatter-resistant type

: 1,500 VACᜠ 50/60 Hz for 1 min (between the charging part and the case)

1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z

Vibration

direction for 2 hours

Shock

500 m/s² (≈ 50 G)

Ambient temperature -25 to 70 ℃, storage: -30 to 80 ℃ (no freezing or condensation)

Ambient humidity

35 to 95 %RH, storage: 35 to 95 %RH (no freezing or condensation)

Protection structure

IP67 (IEC standards)

Connection

Cable type / Cable connector type

DIA. of sensing side Ø 12 mm: Ø 4 mm, 2-wire

Cable spec.

02)

DIA. of sensing side Ø 18 mm, Ø 30 mm: Ø 5 mm, 2-wire

Wire spec.

AWG 22 (0.08 mm, 60-core), insulator diameter: Ø 1.25 mm

Connector spec.

M12 connector

Material

Standard type cable (black): polyvinyl chloride (PVC)

Case/Nut: nickel plated brass, washer: nickel plated iron,

General

sensing side: PBT

Case/Nut: PTFE coated brass, washer: PTFE coated iron,

Spatter-resistant

sensing side: PTFE

01) Except spatter-resistant type

02) Cable type: 2 m, cable connector type: 300 mm

PR□18-5A□

PR□30-10A□

PRA□18-5A□

PRA□30-10A□

Ø 18 mm

Ø 30 mm

5 mm

10 mm

0 to 3.5 mm

0 to 7 mm

18 × 18 × 1 mm

30 × 30 × 1 mm

PR□18-8A □

PR□30-15A □

Ø 18 mm

Ø 30 mm

8 mm

15 mm

0 to 5.6 mm

0 to 10.5 mm

25 × 25 × 1 mm

45 × 45 × 1 mm

Ø 18 mm

Ø 30 mm

≈ 118 g (≈ 130 g)

≈ 170 g (≈ 207 g)

01)

02)

≈ 130 g (≈ 142 g)

≈ 208 g (≈ 245 g)

≈ 66 g (≈ 78 g)

≈ 122 g (≈ 134 g)

≈ 78 g (≈ 90 g)

≈ 158 g (≈ 195 g)

≈ 54 g (≈ 66 g)

≈ 142 g (≈ 154 g)

≈ 66 g (≈ 78 g)

≈ 182 g (≈ 194 g)

)

for 3 times

in each X, Y, Z direction

/ Connector type

model

01)