iHealth BPM1AE Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Tensiómetro iHealth BPM1AE. iHealth BPM1AE 17 páginas.

4. Stay still and calm for one to one and half minutes before

taking a blood pressure measurement.

5. Keep the cuff clean. Cleaning the cuff after every 200 times

of usage is recommended.

If the cuff becomes dirty, clean it with a moistened cloth.

Do not rinse the monitor or cuff with running water.

Body Posture

Sitting Comfortably During Measurement

a. Be seated with your feet flat on the floor without crossing your

legs.

b. Place your hand palm-side up in front of you on a flat surface

such as a desk or table.

c. The middle of the cuff should be at the level of the right atrium

of your heart.

Lying Down During Measurement

a. Lie on your back.

b. Place your arm straight along your side with your hand palm-side

up.

c. The cuff should be placed at the same level as your heart.

Note:

Blood pressure can be affected by the position of the cuff and

your physiologic condition.

a. After applying the cuff and your body is in a comfortable

position, press user1 key or user2 key the the monitor will turn

on and display "While measuring, please relax". Then the monitor

starts to seek zero pressure. If the cuff doesn't connect with

the monitor, press any key the door temperature, outdoor

tempetature(if Wi-Fi set done) ,the battery valume and clock(if

Wi-Fi set done) will display on monitor for 3 seconds, Then the

monitor will turn off automatically.

b. Then the cuff will be slowly inflated. The blood pressure and

pulse will be measured during inflation. Inflation will stop

as soon as the blood pressure and pulse rate have been calculated

and displayed on the screen. The result will automatically be

stored in the Memory bank of the monitor. If memory is stored