iHealth BPM1AE Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Monitor Tekanan Darah iHealth BPM1AE. iHealth BPM1AE 17 halaman.

4. Stay still and calm for one to one and half minutes before
taking a blood pressure measurement.
5. Keep the cuff clean. Cleaning the cuff after every 200 times
of usage is recommended.
If the cuff becomes dirty, clean it with a moistened cloth.
Do not rinse the monitor or cuff with running water.

Body Posture

Sitting Comfortably During Measurement
a. Be seated with your feet flat on the floor without crossing your
legs.
b. Place your hand palm-side up in front of you on a flat surface
such as a desk or table.
c. The middle of the cuff should be at the level of the right atrium
of your heart.
Lying Down During Measurement
a. Lie on your back.
b. Place your arm straight along your side with your hand palm-side
up.
c. The cuff should be placed at the same level as your heart.
Note:
Blood pressure can be affected by the position of the cuff and
your physiologic condition.

OPERATION INSTRUCTIONS

a. After applying the cuff and your body is in a comfortable
position, press user1 key or user2 key the the monitor will turn
on and display "While measuring, please relax". Then the monitor
starts to seek zero pressure. If the cuff doesn't connect with
the monitor, press any key the door temperature, outdoor
tempetature(if Wi-Fi set done) ,the battery valume and clock(if
Wi-Fi set done) will display on monitor for 3 seconds, Then the
monitor will turn off automatically.
b. Then the cuff will be slowly inflated. The blood pressure and
pulse will be measured during inflation. Inflation will stop
as soon as the blood pressure and pulse rate have been calculated
and displayed on the screen. The result will automatically be
stored in the Memory bank of the monitor. If memory is stored
5