iHealth BG5 Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Medidor de glucosa en sangre iHealth BG5. iHealth BG5 16 páginas. Wireless smart gluco-monitoring system
También para iHealth BG5: Manual de inicio rápido (13 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (7 páginas)

Imprimir página

The test strip has

expired

Trouble shooting

Problem

Cause

1. Battery power is too low

Display remains blank

for use.

after the test strip has

2. Too much time has

been inserted into the

passed between inserting

meter.

the test strip and

performing

the test.

3. Test strip has not been

fully inserted into the

Meter.

Test results are

1.Not enough sample in the

inconsistent or Control

Test Strip.

Solution test results are

not within the specified

range.

2.Test strip or Control

Solution has expired.

3.Test strip has been

damaged due to heat or

humidity so that the

sample cannot be

applied, or the speed of

application is too slow.

4.System is not performing

due to the environment

being above or below

room temperature.

The meter countdown

Test strip has not been

did not start.

inserted correctly.

Please use the new test strip.

Solution

1. Charge the battery

2. Reinsert the test strip

into the meter.

3. Reinsert the test strip

into the meter, pressing

ﬁrmly.

1. Re-test with a new Test

Strip and make sure that

enough sample has been

applied.

2. Re-test with a new Test

Strip or new Control

Solution

3. Perform a Control Solution

test using a new Test Strip.

If the results are still out of

range, replace with new

vial of Test Strips.

4. Bring the system to a

room-temperature

environment and wait

approximately 30 minutes

before performing a new

test.

Use a new Test Strip

and redo the test.

In vitro diagnostic medical device

Serial number

Consult instructions for use

Manufacturer

Environmental Protection– Waste electrical products

should not be disposed of with household waste.

Please recycle where facilities exist. Check with

your local authority or retailer for recycling advice.

Authorised representative in the

European Community

FCC ID ZRYBG5

Bluetooth sign

Lot Number

Sterilized Using Irradiation

Complies with IVD98/79/EC

requirements

iHealth is a trademark of iHealth Lab Inc.

"Made for iPod" "Made for iPad"and "Made for iPhone"

mean that an electronic accessory has been designed to

connect speciﬁcally to iPod, iPad,iPhone, respectively, and

has been certiﬁed by the developer to meet Apple

performance standards. Apple is not responsible for the

keep dry

Use by

Do not Reuse