Autool CT500 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Equipos de prueba Autool CT500. Autool CT500 17 páginas. Gdi fuel injector cleaner & tester

Injector

diagnostic

NOTE

During the cleaning process, you can hear the intermittent

(approximately 5 seconds) vibrating sound when you take the

fuel injector out and put it to your ear, so you can judge whether

the fuel injector is working normally.

Ultrasonic cleaning is strictly prohibited when there is no

cleaning agent in the ultrasonic tank to avoid equipment

damage.

Only the ultrasonic cleaning agent dedicated to cleaning the

fuel injection nozzle can be added to the ultrasonic tank, and

other reagents cannot be used instead, otherwise any

malfunctions and damages caused will not be covered by the

warranty.

This function is to detect the atomization, dripping, blockage, fuel

injection angle status of the fuel injectors and the size and

balance of the fuel injection of each fuel injector at different

speeds.

Preparation

●

Confirm that the oil drain handle is open, use the funnel in the

accessories to add the test liquid to the equipment through the

glass window, and pay attention to control the flow rate during

the addition to avoid overflow.

●

Add 1 bottle (about 1000ml) of testing agent each time.

●

Install the fuel injector.