Autool CT500 사용자 설명서 - 페이지 9

{카테고리_이름} Autool CT500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autool CT500 17 페이지. Gdi fuel injector cleaner & tester

Injector

diagnostic

NOTE

During the cleaning process, you can hear the intermittent

(approximately 5 seconds) vibrating sound when you take the

fuel injector out and put it to your ear, so you can judge whether

the fuel injector is working normally.

Ultrasonic cleaning is strictly prohibited when there is no

cleaning agent in the ultrasonic tank to avoid equipment

damage.

Only the ultrasonic cleaning agent dedicated to cleaning the

fuel injection nozzle can be added to the ultrasonic tank, and

other reagents cannot be used instead, otherwise any

malfunctions and damages caused will not be covered by the

warranty.

This function is to detect the atomization, dripping, blockage, fuel

injection angle status of the fuel injectors and the size and

balance of the fuel injection of each fuel injector at different

speeds.

Preparation

●

Confirm that the oil drain handle is open, use the funnel in the

accessories to add the test liquid to the equipment through the

glass window, and pay attention to control the flow rate during

the addition to avoid overflow.

●

Add 1 bottle (about 1000ml) of testing agent each time.

●

Install the fuel injector.