Autopage MA-200 Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Sistema de seguridad Autopage MA-200. Autopage MA-200 13 páginas. 2-way remote control motorcycle alarm
También para Autopage MA-200: Manual de instrucciones de instalación (8 páginas)
Enter Valet Mode:
1. From the disarmed condition, turn the ignition to "ON" position.
2. Push and hold valet switch for 2 seconds until the LED turns on. The LED will
remain on as long as the system is in 'valet mode'.
Exit Valet Mode:
1. Return to normal operation, turn ignition 'ON'.
2. Push and hold valet switch for 2 seconds; The LED will turn off, indicating that the
system has exited the valet mode.
REMOTE VALET: (System in Disarm or Valet mode)
F
Press and release the
button three times within 3 seconds to enter / exit valet mode.
A parking lights flash will confirm entering the valet mode.
Two parking lights flashes will confirm exit.
L. MOTORCYCLE LOCATOR:
Press the
button on the 5-button 2-way transceiver in armed mode to activate the motorcycle locator
function. The siren will chirp 6 times and the parking lights will flash 12 times, for you to easily locate your
motorcycle.
M. PANIC FUNCTION:
The transmitter can be used as a remote panic switch to manually trigger the alarm in
case emergency. To activate the panic mode, press and hold
transmitter for 3 seconds. The siren will sound and continue for 30 seconds or until the
or
button is activated a second time.
N. TRIGGER THE SYSTEM
When armed, your motorcycle is protected as follows:
1. Light impacts will trigger the warn-away signal. A long chirp from siren/horn.
2. Heavy impacts will trigger the system. The full trigger sequence is 30 seconds of constant siren and
flashing parking lights.
3. If the tilt switch is triggered / the closed loop wires of the connection are not in contact / the ignition is
turned on while the system is armed, the full trigger sequence will activate.
4. The starter kill prevents the motorcycle's starter from cranking.
Activated on the
Activated on the
Tilt Sensor
Close Loop
Clear The Flash Icon And Melody Sound: While triggering the alarm, the LCD screen will alert the user
through melody sound and flashing trigger icon. Pressing the
clear the flash icon and stop the melody sound on the LCD screen transceiver.
Stop The Melody Sound Only: While triggering the alarm the LCD screen will alert user through melody
sound and flashing trigger icon. Press any button on the LCD remote transceiver to stop melody sound
only.
NOISE ABATEMENT CIRCUIT:
repetitive trigger sequences due to faulty sensor or environmental condition such as thunder,
jackhammers, airport noise, etc.
Here's how "Noise Abatement Circuit" works: The alarm triggers five times. Each time, the same sensor or
switch is triggering the alarm. "Noise Abatement Circuit" will interpret this pattern of triggers as false alarm.
After the fifth trigger, "Noise Abatement Circuit" ignores, or by- passes that sensor or switch until the other
sensor or switch is triggered.
MA-200 OP REV.A
or
Activated on the
Activated on the
Shock Sensor
Ignition Switch
button 3 times within 3 seconds will
Your system has "Noise Abatement Circuit". It prevents annoying
6
Oct/23/2006
button of your
Warn-away
Trigger