Autopage RF-525 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Sistema de seguridad Autopage RF-525. Autopage RF-525 20 páginas. Professional 2-way lcd 6 channel security system with two-way serial port data link

Imprimir página

SYSTEM'S STATUS CHECK

(For two-way transceiver operation only)

When you want to check the system's present status through the

LCD screen, Press the transceiver

button twice, within 3

seconds press

the LCD screen should be illuminated.

Note: If it has no responds then you are out of range.

DRIVER PAGING

(For two-way transceiver operation only)

It is useful the event that someone wants to page the driver of the

parked vehicle.

Under the ignition switch "off" condition, press and hold the valet

switch for 2 seconds or press the pager button once on the

transmitter antenna to page the driver, one chirp sound shall be

emitted from the vehicle and the paging melody sound continues

you Remote LCD transceiver and "

" indication flashes on the

LCD screen.

DOME LIGHT CONVENIENCE DELAY & SUPERVISION

The alarm with a unique feature which will turn on your vehicle dome light as following:

1. Upon disarming, the interior light will remain on for 30 seconds.

2. If the vehicle is intruded, the dome light will flash for the same duration as the siren.

Note: Turn on the ignition switch or arm the alarm will turn off the dome light.

IGNITION CONTROL DOOR LOCK/UNLOCK.

If the vehicles door locks have been interfaced to the security system, the system will

automatically lock the vehicle's doors when the ignition is turned "ON" and /or unlock

the vehicle's doors when the ignition is turned "OFF".

TRUNK RELEASE OUTPUT.

Press and hold

button on the transmitter for 2 seconds to

remote control the trunk release or other electric devices.

CHANNEL 3 AUXILIARY CONTROL OUTPUT (Available Option)

Press the transmitter

button to active Channel 3 function. Channel 3 is a

programmable output. This feature, when installed with optional accessories, may be

used to operate power windows, sunroofs, etc. from your remote transmitter.

CHANNEL 4 AUXILIARY CONTROL OUTPUT (Available Option)

Press the transmitter

button to active Channel 4 function. Channel 4 is a

programmable output. This feature, when installed with optional accessories, may be

used to operate power windows, sunroofs, etc. from your remote transmitter.

CHANNEL 5 AUXILIARY CONTROL OUTPUT (Available Option)