Autopage RF-525 Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Sistema de seguridad Autopage RF-525. Autopage RF-525 20 páginas. Professional 2-way lcd 6 channel security system with two-way serial port data link

Imprimir página

Press the transmitter

programmable output. This feature, when installed with optional accessories, may be

used to operate power windows, sunroofs, etc. from your remote transmitter.

CHANNEL 6 AUXILIARY CONTROL OUTPUT (Available Option)

Press the transmitter

programmable output. This feature, when installed with optional accessories, may be

used to operate power windows, sunroofs, etc. from your remote transmitter.

POWER ON MEMORY:

This security system is equipped with circuitry that will allow the unit to remember its

alarm state if the power is lost and then reconnected.

SECOND VEHICLE SECURITY OPERATION:

Your 5-button remote transmitter can be utilized to control a second vehicle security

system, To program the remote control transmitter to a second vehicle, follow the

instructions for Transmitter programming. All programming parameters be the same

except for the following:

For Regular Remote Control Transmitter:

1. Prior to pushing any button on the transmitter. Press the Select II button first on

the transmitter.

2. Once II button is pressed the LED on the transmitter will illuminate for 3.5

seconds to indicate the second transmitter pin code has built-in.

3. While the LED is illuminated, press any button on the remote control transmitter

to control a second vehicle security system.

For 2-way LCD Remote Control Transceiver 2nd Car Operation:

1. Press

first, within 3 seconds press and hold

time for 2 seconds with two beeping sound and the "

LCD screen to indicate the second transceiver pin code has built-in.

2. While the "

" icon display on the LCD screen, you can

remote control and communicate with a second vehicle security

system. It has two short "bi" sounds while pressing the button of

the LCD screen transceiver.

Back to 1st Car Operation:

1. Press

first, within 3 seconds press and hold

buttons at the same time for 2 seconds

and the "

" timer icon will display on the LCD screen to indicate the

system is back to first transceiver pin code.

2. While the "

" timer icon display on the LCD screen, you can

remote control and communicate with a first vehicle security system. It has

one short "bi" sound while pressing the button of the LCD screen

transceiver.

LCD REMOTE CONTROL TRANSCEIVER

button to active Channel 5 function. Channel 5 is a

button to active Channel 6 function. Channel 6 is a

with one long beeping sound

and

buttons at the same

" icon will display on the

and