Autopage RF-525 Посібник з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Система безпеки Autopage RF-525. Autopage RF-525 20 сторінок. Professional 2-way lcd 6 channel security system with two-way serial port data link
Друкувати сторінкуPress the transmitter
+
programmable output. This feature, when installed with optional accessories, may be
used to operate power windows, sunroofs, etc. from your remote transmitter.
CHANNEL 6 AUXILIARY CONTROL OUTPUT (Available Option)
Press the transmitter
+
programmable output. This feature, when installed with optional accessories, may be
used to operate power windows, sunroofs, etc. from your remote transmitter.
POWER ON MEMORY:
This security system is equipped with circuitry that will allow the unit to remember its
alarm state if the power is lost and then reconnected.
SECOND VEHICLE SECURITY OPERATION:
Your 5-button remote transmitter can be utilized to control a second vehicle security
system, To program the remote control transmitter to a second vehicle, follow the
instructions for Transmitter programming. All programming parameters be the same
except for the following:
For Regular Remote Control Transmitter:
1. Prior to pushing any button on the transmitter. Press the Select II button first on
the transmitter.
2. Once II button is pressed the LED on the transmitter will illuminate for 3.5
seconds to indicate the second transmitter pin code has built-in.
3. While the LED is illuminated, press any button on the remote control transmitter
to control a second vehicle security system.
For 2-way LCD Remote Control Transceiver 2nd Car Operation:
1. Press
first, within 3 seconds press and hold
time for 2 seconds with two beeping sound and the "
LCD screen to indicate the second transceiver pin code has built-in.
2. While the "
" icon display on the LCD screen, you can
remote control and communicate with a second vehicle security
system. It has two short "bi" sounds while pressing the button of
the LCD screen transceiver.
Back to 1st Car Operation:
1. Press
first, within 3 seconds press and hold
buttons at the same time for 2 seconds
and the "
" timer icon will display on the LCD screen to indicate the
system is back to first transceiver pin code.
2. While the "
" timer icon display on the LCD screen, you can
remote control and communicate with a first vehicle security system. It has
one short "bi" sound while pressing the button of the LCD screen
transceiver.
LCD REMOTE CONTROL TRANSCEIVER
button to active Channel 5 function. Channel 5 is a
button to active Channel 6 function. Channel 6 is a
with one long beeping sound
11
and
buttons at the same
" icon will display on the
and
: