High Tech Gio-Bella HTH 888 Manual - Página 5
Navegue en línea o descargue pdf Manual para Sistemas de filtración de agua High Tech Gio-Bella HTH 888. High Tech Gio-Bella HTH 888 16 páginas. Point of use residential water alkalizer for drinking and cooking
Imprimir páginadetermined by convenience and easy access to both an
electrical outlet and water.
Remove original faucet aerator. This is usually done
•
without tools by rotating counter-clockwise.
Put the original aerator in a safe place and
•
install the diverter valve assembly in its place.
Note that if your faucet has threads on the
inside, there are 2 adapters included that can
be used. Position the diverter valve with the
barbed fitting pointing towards the Gio-Bella
Next, take the hose kit and roughly gauge
•
sufficient length from the Gio-Bella water
INPUT, to the barbed fitting on the diverter valve. Please
allow for the lateral swing of the faucet. You should also
compensate for any extra if you will be adding a
Bluestone Group pre-filter.
Once a sufficient length is determined, use a sharp pair of
•
scissors and cut the hose straight across in a single cut.
Using a dab of Vaseline, or soap, lubricate the end of the
•
diverter valve barbed fitting. Select a
clamp from the hose kit and place over
the hose end. Next, firmly press the hose
onto the barbed fitting until the entire
fitting length is inside the hose.
Slide the screw clamp onto the end of the
•
hose to the point where it is midway over where the
barbed fitting has penetrated. Tighten the screw clamp
firmly with a Phillips screwdriver. (Note, in some markets
spring clamps may be supplied instead.)
If installing any of Bluestone Group's prefilters:
•
o Sediment
5
Attaching
diverter to
faucet
Attaching hose to
diverter